Disclaimer
How to change front anti roll bar links on RENAULT Scénic I (JA0/1, FA0) – replacement guide
downloads:
11
Views:
90
Important!
This replacement procedure can be used for:
RENAULT Scénic I (JA0/1_, FA0_) 1.4 16V (JA0D, JA1H, Ja0W, JA10), RENAULT Scénic I (JA0/1_, FA0_) 2.0 16V (JA1D, JA17), RENAULT Scénic I (JA0/1_, FA0_) 2.0 16V RX4, RENAULT Scénic I (JA0/1_, FA0_) 1.9 dCi RX4, RENAULT Scénic I (JA0/1_, FA0_) 1.9 dTi (JA0N), RENAULT Scénic I (JA0/1_, FA0_) 2.0 16V (JA1B, JA1D, JA0C), RENAULT Scénic I (JA0/1_, FA0_) 1.9 dCi (JA05, JA1F), RENAULT Scénic I (JA0/1_, FA0_) 1.9 dTi (JA1U), RENAULT Scénic I (JA0/1_, FA0_) 1.8 16V (JA12, JA1R, JA1M, JA1A) … View more
The steps may slightly vary depending on the car design.
RENAULT Scénic I (JA0/1_, FA0_) 1.4 16V (JA0D, JA1H, Ja0W, JA10), RENAULT Scénic I (JA0/1_, FA0_) 2.0 16V (JA1D, JA17), RENAULT Scénic I (JA0/1_, FA0_) 2.0 16V RX4, RENAULT Scénic I (JA0/1_, FA0_) 1.9 dCi RX4, RENAULT Scénic I (JA0/1_, FA0_) 1.9 dTi (JA0N), RENAULT Scénic I (JA0/1_, FA0_) 2.0 16V (JA1B, JA1D, JA0C), RENAULT Scénic I (JA0/1_, FA0_) 1.9 dCi (JA05, JA1F), RENAULT Scénic I (JA0/1_, FA0_) 1.9 dTi (JA1U), RENAULT Scénic I (JA0/1_, FA0_) 1.8 16V (JA12, JA1R, JA1M, JA1A) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Scénic I (JA0/1_, FA0_) and other RENAULT models
Alternative products

Wire brush
WD-40 spray
Copper grease
Drive socket # 13
Torx bit T45
Wheel impact socket #19
Ratchet wrench
Torque wrench
Hydraulic transmission jack
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on RENAULT SCÉNIC I (JA0/1_) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – RENAULT SCÉNIC I (JA0/1_). Use the following procedure:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: anti roll bar links – RENAULT SCÉNIC I (JA0/1_). Tip from AUTODOC experts:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the stabilizer rod fasteners. Use a drive socket #13. Use a ratchet wrench. - Step 8
Remove the stabilizer rod.Replacement: anti roll bar links – RENAULT SCÉNIC I (JA0/1_). Tip from AUTODOC:Examine stabiliser bushes. Replace them if needed. - Step 9
Clean all joints of the stabiliser link. Use a wire brush. Treat all joints of the stabiliser link. Use WD-40 spray. - Step 10
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Scénic I (JA0/1, FA0) model
Popular maintenance tutorials for Renault Scenic 1
Complete guides for changing the Drop links on different RENAULT SCÉNIC models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT Scénic I (JA0/1_, FA0_)
View more
5 tools that make car repair incredibly simple | AUTODOC tips
TOP 5 mistakes during DIY oil change | AUTODOC tips
How to Install a New Windscreen Yourself | AUTODOC Expert Tips
5 reasons why your car is making a knocking sound
Most commonly replaced car parts on RENAULT SCÉNIC
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



























