
Disclaimer
How to change front ball joint on RENAULT Kangoo I (KC) – replacement guide
downloads:
10
Views:
223
Important!
This replacement procedure can be used for:
RENAULT KANGOO (KC0/1_) 1.2 (KC0A, KC0K, KC0F, KC01), RENAULT KANGOO (KC0/1_) 1.4 (KC0C, KC0H, KC0B, KC0M), RENAULT KANGOO (KC0/1_) D 55 1.9 (KC0D), RENAULT KANGOO (KC0/1_) D 65 1.9 (KC0E, KC02, KC0J, KC0N), RENAULT KANGOO (KC0/1_) 1.9 dTi (KC0U), RENAULT KANGOO (KC0/1_) 1.6 16V, RENAULT KANGOO (KC0/1_) 1.6 16V 4x4 (KC0P, KC0S, KC0L), RENAULT KANGOO (KC0/1_) 1.2 16V (KC05, KC06, KC03, KC0T, KC0W, KC1D), RENAULT KANGOO (KC0/1_) 1.5 dCi (KC07), RENAULT KANGOO (KC0/1_) 1.9 dCi 4x4 (KC0V), RENAULT KANGOO (KC0/1_) 1.5 dCi (KC08, KC09), RENAULT KANGOO (KC0/1_) 1.9 dCi 4x4, RENAULT KANGOO (KC0/1_) 1.5 dCi, RENAULT KANGOO (KC0/1_) 1.6 16V bivalent, RENAULT KANGOO (KC0/1_) 1.5 dCi, RENAULT KANGOO (KC0/1_) 1.5 dCi, RENAULT KANGOO (KC0/1_) 1.6 (KC00), RENAULT KANGOO (KC0/1_) 1.0, RENAULT KANGOO (KC0/1_) 1.0 RN … View more
The steps may slightly vary depending on the car design.
RENAULT KANGOO (KC0/1_) 1.2 (KC0A, KC0K, KC0F, KC01), RENAULT KANGOO (KC0/1_) 1.4 (KC0C, KC0H, KC0B, KC0M), RENAULT KANGOO (KC0/1_) D 55 1.9 (KC0D), RENAULT KANGOO (KC0/1_) D 65 1.9 (KC0E, KC02, KC0J, KC0N), RENAULT KANGOO (KC0/1_) 1.9 dTi (KC0U), RENAULT KANGOO (KC0/1_) 1.6 16V, RENAULT KANGOO (KC0/1_) 1.6 16V 4x4 (KC0P, KC0S, KC0L), RENAULT KANGOO (KC0/1_) 1.2 16V (KC05, KC06, KC03, KC0T, KC0W, KC1D), RENAULT KANGOO (KC0/1_) 1.5 dCi (KC07), RENAULT KANGOO (KC0/1_) 1.9 dCi 4x4 (KC0V), RENAULT KANGOO (KC0/1_) 1.5 dCi (KC08, KC09), RENAULT KANGOO (KC0/1_) 1.9 dCi 4x4, RENAULT KANGOO (KC0/1_) 1.5 dCi, RENAULT KANGOO (KC0/1_) 1.6 16V bivalent, RENAULT KANGOO (KC0/1_) 1.5 dCi, RENAULT KANGOO (KC0/1_) 1.5 dCi, RENAULT KANGOO (KC0/1_) 1.6 (KC00), RENAULT KANGOO (KC0/1_) 1.0, RENAULT KANGOO (KC0/1_) 1.0 RN … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Suspension Ball Joint for KANGOO (KC0/1_) and other RENAULT models
Ball Joint
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #16
Combination spanner #18
Drive socket # 16
Drive socket # 18
Wheel impact socket #19
Ratchet wrench
Flat chisel
Crow bar
Hammer
Wheel chock
Replacement: ball joint – RENAULT KANGOO (KC0/1_). AUTODOC experts recommend:
- The replacement procedure is identical for the left and right ball joints.
- Please note: all work on the car – RENAULT KANGOO (KC0/1_) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.Step 2Loosen the wheel mounting bolts. Use wheel impact socket #19.
- Step 3Raise the car.Replacement: ball joint – RENAULT KANGOO (KC0/1_). Tip from AUTODOC experts:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.Step 4Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. RENAULT KANGOO (KC0/1_)
- Step 5Remove the wheel.
- Step 6Clean the fastener connecting the ball joint to the steering knuckle. Use a wire brush. Use WD-40 spray.
- Step 7Unscrew the ball joint fastening to the steering knuckle. Use a combination spanner #16. Use a drive socket #16. Use a ratchet wrench.
- Step 8Unscrew the caliper bracket fastening. Use a drive socket #18. Use a ratchet wrench.
- Step 9Remove the fastening bolt.
- Step 10Clean the fasteners connecting the ball joint to the suspension control arm. Use a wire brush. Use WD-40 spray.
- Step 11Unscrew the fastener connecting the ball joint to the suspension control arm. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench.
- Step 12Release the fastener connecting the ball joint to the steering knuckle. Use a crowbar.
- Step 13Disconnect the ball joint from the control arm.
- Step 14Disconnect the ball joint from the steering knuckle. Use a flat metal-working chisel. Use a hammer.
- Step 15Clean the ball joint mounting seat. Use a wire brush.Step 16Install a new ball joint.Replacement: ball joint – RENAULT KANGOO (KC0/1_). AUTODOC experts recommend:Do not damage the ball joint cover.Step 17Treat the fasteners of the ball joint. Use copper grease.
- Step 18Connect the ball joint to the steering knuckle.
- Step 19Attach the ball joint to the control arm.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 1
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Kangoo I (KC) model
Popular maintenance tutorials for Renault Kangoo kc01
Complete guides for changing the Suspension ball joint on different RENAULT KANGOO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT KANGOO (KC0/1_)
View more
- How to remove rust | AUTODOC tips
- Transform Your Car's Look: 6 Simple Accessories You Need to Try!
- TOP 6 WD-40 lifehacks | AUTODOC tips
- Why Is the Windscreen Washer Not Spraying? Solution
Most commonly replaced car parts on RENAULT KANGOO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME