
Disclaimer
How to change front anti roll bar links on VW Polo IV Saloon (9A4, 9A2, 9N2, 9A6) – replacement guide
downloads:
1
Views:
8
Important!
This replacement procedure can be used for:
VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.9 SDI, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4 TDI, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.6, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.9 TDi … View more
The steps may slightly vary depending on the car design.
VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.9 SDI, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4 TDI, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.6, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.9 TDi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Polo Saloon (9A4, 9A2, 9N2, 9A6) and other VW models
Anti-roll bar link
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Drive socket # 16
Combination spanner #16
Torx bit T30
Wheel impact socket #17
Ratchet wrench
Torque wrench
Crow bar
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on VW POLO Saloon (9A4) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – VW POLO Saloon (9A4). Recommended sequence of steps:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. VW POLO Saloon (9A4)
- Step 5Remove the wheel.
- Step 6Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.Step 7Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #16. Use a ratchet wrench.
- Step 8Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use Torx T30. Use a ratchet wrench.
- Step 9Remove the stabilizer rod. Use a crowbar.Replacement: anti roll bar links – VW POLO Saloon (9A4). AUTODOC experts recommend:Examine stabiliser bushes. Replace them if needed.
- Step 10Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
- Step 11Install a new rod, tighten the fasteners. Use a combination spanner #16. Use a drive socket #16. Use Torx T30. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Polo IV Saloon (9A4, 9A2, 9N2, 9A6) model
Popular maintenance tutorials for VW Polo 9A4
Complete guides for changing the Drop links on different VW POLO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW Polo Saloon (9A4, 9A2, 9N2, 9A6)
View more
- 5 most common causes of oil leaks | AUTODOC tips
- TOP 5 mistakes during DIY oil change | AUTODOC tips
- How to Make a DIY Foam Sprayer | AUTODOC tips
- Checking the starter without removing it | AUTODOC tips
Most commonly replaced car parts on VW POLO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME