Important!
This replacement procedure can be used for:
VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.6 Total Flex, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.0, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 2.0, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.9 TDi, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.6, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4 TDI, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.9 SDI, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Strut Mount for Polo Saloon (9A4, 9A2, 9N2, 9A6) and other VW models
Tools
Replacement: strut mount – VW POLO Saloon (9A4). Tools you need:
Wire brush
WD-40 spray
Copper grease
Drive socket # 13
Drive socket # 16
Drive socket # 18
12-point socket # 36
HEX bit No.H5.
HEX bit No.H7.
Combination spanner #16
Combination spanner #18
Combination spanner #21
Wheel impact socket #17
Shock absorber socket
Ratchet wrench
Torque wrench
Tap wrench
Pin punch
Hammer
Crow bar
Hydraulic strut spring compressor
Hydraulic transmission jack
Fender cover
Wheel chock
Replacement: strut mount – VW POLO Saloon (9A4). Tip from AUTODOC:
  • All mounts of the front shock struts should be replaced simultaneously.
  • The replacement procedure is identical for the mounts of the left and right shock struts of the front suspension.
  • Be sure to replace all self-locking nuts and bolts during installation.
  • Warning! Shut down the engine before starting any work – VW POLO Saloon (9A4).
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Strut Mount on VW Polo 9A4 2002 - free PDF and video manuals
    Loosen the upper fastener of the shock strut mount. Use a drive socket #13. Use a ratchet wrench.
  2. Step 4
    How to replace VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4 2003 Strut Mount - step-by-step manuals and video guides
    Secure the wheels with chocks.
  3. Step 5
    VW Polo 9A4 1.4 TDI 2004 Strut Mount replacement: free workshop manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  4. Step 6
    Changing Strut Mount on VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.9 SDI 2005 by yourself
    Remove the hub bearing protection cap.
    Please note!
    Some cars are not equipped with wheel hub caps.
  5. Step 7
    How to remove VW POLO 1.6 2006 Strut Mount - online easy-to-follow instructions
    Unscrew the hub lock nut. Use drive 12-point socket #36.
  6. Step 8
    Raise the front of the car and secure on supports.
    Step 9
    How to replace Strut Mount on VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 2007: download PDF manuals and video instructions
    Unscrew the wheel bolts.
    Replacement: strut mount – VW POLO Saloon (9A4). AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  7. Step 10
    How hard is it to do yourself: Strut Mount replacement on VW Polo 9A4 1.6 Flex 2008 - download illustrated guide
    Remove the wheel.
  8. Step 11.1
    Need to know how to renew Strut Mount on VW POLO 2009? This free workshop manual will help you to do it yourself
    Clean the fasteners connecting the stabiliser link to the shock strut, and those connecting the shock strut to the steering knuckle.
    Step 11.2
    Changing of Strut Mount on VW Polo 9A4 2010 won't be an issue if you follow this illustrated step-by-step guide
    Use a wire brush. Use WD-40 spray.
  9. Step 12
    VW POLO 1.4 Strut Mount replacement: online guides and video tutorials
    Unscrew the nut and remove the stabilizer rod from the shock strut. Use a combination spanner #16. Use HEX No.H5. Use a ratchet wrench.
  10. Step 13
    Replacing Strut Mount on VW Polo 9A4 2012 1.4 by yourself
    Unscrew the lower fastener connecting the shock strut to the steering knuckle. Use a combination spanner #18. Use a drive socket #18. Use a tap wrench.
  11. Step 14
    Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.6 2013 Strut Mount DIY replacement workshop manual
    Detach the brake hose from the shock strut. Use a crowbar.
  12. Step 15
    How to change Strut Mount on VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 2014 - tips and tricks
    Remove the fastening bolt.
  13. Step 16
    Step-by-step recommendations for DIY replacement VW Polo 9A4 2015 1.6 Strut Mount
    Release the lower fastener connecting the shock strut to the steering knuckle. Use a special drive socket to remove the shock absorber. Use a ratchet wrench.
  14. Step 17
    DIY replacement of Strut Mount on VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.9 TDi 2016 is not an issue anymore with our step-by-step tutorial
    Clean the ball joint mounting seat. Use a wire brush. Use WD-40 spray.
  15. Step 18
    How to change Strut Mount on VW Polo 9A4 2002 - free PDF and video manuals
    Unscrew the fastener connecting the ball joint to the suspension control arm. Use a drive socket #13. Use a ratchet wrench.
  16. Step 19
    How to replace VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4 2003 Strut Mount - step-by-step manuals and video guides
    Prop up the steering knuckle. Use a hydraulic transmission jack.
  17. Step 20
    VW Polo 9A4 1.4 TDI 2004 Strut Mount replacement: free workshop manuals
    Disconnect the spherical joint from the arm. Use a crowbar.
  18. Step 21
    Changing Strut Mount on VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.9 SDI 2005 by yourself
    Unscrew the fastener connecting the drive shaft to the wheel hub. Use drive 12-point socket #36.
  19. Step 22
    How to remove VW POLO 1.6 2006 Strut Mount - online easy-to-follow instructions
    Treat the mounting seat of the driveshaft on the steering knuckle. Use WD-40 spray.
  20. Step 23
    How to replace Strut Mount on VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 2007: download PDF manuals and video instructions
    Pull the drive shaft out of the steering knuckle and lifting it, tie to the body. Use a pin punch. Use a hammer.
    Replacement: strut mount – VW POLO Saloon (9A4). AUTODOC experts recommend:
    Make sure that the drive shaft is not unloaded (when the car is jacked).
  21. Step 24
    How hard is it to do yourself: Strut Mount replacement on VW Polo 9A4 1.6 Flex 2008 - download illustrated guide
    Disconnect the steering knuckle from the shock absorber strut. Use a pin punch. Use a hammer.
  22. Step 25
    Need to know how to renew Strut Mount on VW POLO 2009? This free workshop manual will help you to do it yourself
    Lower the hydraulic transmission jack by 10-15 cm.
    AUTODOC recommends:
    Replacement: strut mount – VW POLO Saloon (9A4). Lower the transmission jack smoothly, without jerks, to avoid damaging components and mechanisms.Make sure that the steering knuckle is not released from load.
  23. Step 26
    Changing of Strut Mount on VW Polo 9A4 2010 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the top fastening of the shock strut mount. Use a drive socket #13. Use a ratchet wrench.
    Replacement: strut mount – VW POLO Saloon (9A4). Tip from AUTODOC experts:
    To avoid injuries, hold the shock strut when undoing the fastening bolts.
  24. Step 27
    VW POLO 1.4 Strut Mount replacement: online guides and video tutorials
    Remove the suspension strut.
  25. Step 28
    Replacing Strut Mount on VW Polo 9A4 2012 1.4 by yourself
    Set the shock absorber strut on the spring compressor tool.
    Replacement: strut mount – VW POLO Saloon (9A4). Professionals recommend:
    Note that when using a spring compressor, spring coils need to be securely gripped, compressing the spring on the opposite sides.Ensure the correct position of the spring in the retainer.Make sure that the spring coils tightly entered the lock handles.
  26. Step 29
    Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.6 2013 Strut Mount DIY replacement workshop manual
    Compress the spring.
  27. Step 30
    How to change Strut Mount on VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 2014 - tips and tricks
    Clean the shock absorber rod. Use a wire brush. Use WD-40 spray.
  28. Step 31
    Step-by-step recommendations for DIY replacement VW Polo 9A4 2015 1.6 Strut Mount
    Remove the strut piston rod nut. Use a combination spanner #21. Use HEX No.H7. Use a ratchet wrench.
  29. Step 32
    DIY replacement of Strut Mount on VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.9 TDi 2016 is not an issue anymore with our step-by-step tutorial
    Remove the shock absorber mount, boot and bump stop.
    Replacement: strut mount – VW POLO Saloon (9A4). Tip:
    Examine the shock absorber dust cap and the bump stop. Replace them if necessary.
  30. Step 33
    How to change Strut Mount on VW Polo 9A4 2002 - free PDF and video manuals
    Install the new mount, boot, and bump stop on the shock absorber.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VW Polo IV Saloon (9A4, 9A2, 9N2, 9A6) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW Polo Saloon (9A4, 9A2, 9N2, 9A6) Strut Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW Polo Saloon (9A4, 9A2, 9N2, 9A6) Strut Mount replacement - online guide
Tips & tricks for your VW Polo Saloon (9A4, 9A2, 9N2, 9A6)
View more
  • How to change Strut mount on VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.9 TDi - replacement tricks
    How to unlock your car without a key | AUTODOC tips
  • Changing Top mount VW Polo 9A4 1.4 - Replacement Tips
    Things you should never do with an automatic transmission | AUTODOC tips
  • Maintenance Hacks - VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4 TDI Top strut mount replacement guide
    5 common car washing mistakes | AUTODOC tips
  • Replace Top mounts on VW Polo 9A4 - free video tips
    TOP 5 mistakes during DIY oil change | AUTODOC tips