Important!
This replacement procedure can be used for:
VW POLO (AW1, BZ1) 1.0, VW POLO (AW1, BZ1) 1.0 TSI, VW POLO (AW1, BZ1) 1.0, VW POLO (AW1, BZ1) 1.0 TSI, VW POLO (AW1, BZ1) 1.0 TGI, VW POLO (AW1, BZ1) 2.0 GTI, VW POLO (AW1, BZ1) 1.6 TDI, VW POLO (AW1, BZ1) 1.6 TDI, VW POLO (AW1, BZ1) 1.0 MPi, VW POLO (AW1, BZ1) 1.5 TSI, VW POLO (AW1, BZ1) 1.0 TSI, VW POLO (AW1, BZ1) GTI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: anti roll bar links – VW POLO (AW1, BZ1). Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Drive socket # 16
Combination spanner #16
Torx bit T30
Wheel impact socket #17
Ratchet wrench
Torque wrench
Crow bar
Wheel chock
AUTODOC recommends:
  • Replace the stabiliser links on VW POLO (AW1, BZ1) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – VW POLO (AW1, BZ1). Recommended sequence of steps:
  1. Step 1
    How to change Anti Roll Bar Links on Polo 6 2017 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace VW POLO (AW1, BZ1) 1.0 TSI 2018 Anti Roll Bar Links - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Polo 6 2.0 GTI 2019 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. VW POLO (AW1, BZ1)
  4. Step 5
    Changing Anti Roll Bar Links on VW POLO (AW1, BZ1) 1.0 2020 by yourself
    Remove the wheel.
  5. Step 6
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
    Step 7
    How to remove VW POLO 1.0 (CHYB) 2021 Anti Roll Bar Links - online easy-to-follow instructions
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #16. Use a ratchet wrench.
  6. Step 8
    How to replace Anti Roll Bar Links on VW POLO (AW1, BZ1) 2022: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use Torx T30. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Anti Roll Bar Links replacement on Polo 6 1.6 MSi 2023 - download illustrated guide
    Remove the stabilizer rod. Use a crowbar.
    Replacement: anti roll bar links – VW POLO (AW1, BZ1). AUTODOC experts recommend:
    Examine stabiliser bushes. Replace them if needed.
  8. Step 10
    Need to know how to renew Anti Roll Bar Links on VW POLO 2024? This free workshop manual will help you to do it yourself
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  9. Step 11
    Changing of Anti Roll Bar Links on Polo 6 2017 won't be an issue if you follow this illustrated step-by-step guide
    Install a new rod, tighten the fasteners. Use a combination spanner #16. Use a drive socket #16. Use Torx T30. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VW Polo VI (AW1, BZ1) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW POLO (AW1, BZ1) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
Autodoc CLUB App icon
DIY VW POLO (AW1, BZ1) Anti Roll Bar Links replacement - online guide
Tips & tricks for your VW POLO (AW1, BZ1)
View more
  • How to change Drop links on VW POLO (AW1, BZ1) 1.6 TDI - replacement tricks
    Unveiling the secrets: Detecting vacuum leaks with a Smoke Machine | AUTODOC
  • Changing Stabilizer link Polo 6 1.0 TSI - Replacement Tips
    Top 5 reasons why your car squeals | AUTODOC Tips
  • Maintenance Hacks - VW POLO (AW1, BZ1) 2.0 GTI Sway bar link replacement guide
    3 essential tips for choosing summer tyres | Get ready for warmer weather
  • Replace Drop link on Polo 6 - free video tips
    The Ultimate Guide to Engine Bay Cleaning | AUTODOC