Disclaimer
How to change front anti roll bar links on VW Polo 5 – replacement guide
downloads:
7
Views:
122
Important!
This replacement procedure can be used for:
VW Polo Saloon (602, 604, 612, 614) 1.6, VW Polo Saloon (602, 604, 612, 614) 1.6, VW Polo Saloon (602, 604, 612, 614) 1.2 TSI, VW Polo Saloon (602, 604, 612, 614) 1.6, VW Polo Saloon (602, 604, 612, 614) 1.6, VW Polo Saloon (602, 604, 612, 614) 1.4 TSi … View more
The steps may slightly vary depending on the car design.
VW Polo Saloon (602, 604, 612, 614) 1.6, VW Polo Saloon (602, 604, 612, 614) 1.6, VW Polo Saloon (602, 604, 612, 614) 1.2 TSI, VW Polo Saloon (602, 604, 612, 614) 1.6, VW Polo Saloon (602, 604, 612, 614) 1.6, VW Polo Saloon (602, 604, 612, 614) 1.4 TSi … View more
The steps may slightly vary depending on the car design.
How to change front anti roll bar link / drop link on VW POLO 5 (612) [TUTORIAL AUTODOC]

All the parts you need to replace – Anti Roll Bar Links for Polo Saloon (602, 604, 612, 614) and other VW models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #17
Drive socket # 16
Drive socket # 17
HEX bit No.H5.
Wheel impact socket #17
Ratchet wrench
Torque wrench
Wheel chock
Replacement: anti roll bar links – VW Polo 5. AUTODOC experts recommend:
- Replace the stabiliser links on VW Polo 5 in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – VW Polo 5. Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3
Raise the rear of the car and secure on supports. - Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. VW Polo 5 - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #16. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #16. Use a ratchet wrench. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – VW Polo 5. Tip from AUTODOC experts:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Install a new rod, tighten the fasteners. Use a combination spanner #17. Use HEX No.H5.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Polo V Saloon (602, 604, 612, 614) model
Popular maintenance tutorials for VW Polo 5 Saloon
Complete guides for changing the Drop links on different VW POLO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW Polo Saloon (602, 604, 612, 614)
View more
Transform Your Car's Look: 6 Simple Accessories You Need to Try!
How to Polish Your Car Yourself and Save Money on Garage Services | AUTODOC tips
5 causes of turbocharger failure and how to avoid them
Revitalize Your Car Interior: DIY Steering Wheel Cover with AUTODOC Tips
Most commonly replaced car parts on VW POLO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





























