Important!
This replacement procedure can be used for:
VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.9 TDi, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.6, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4 TDI, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.9 SDI, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: wheel bearing – VW POLO Saloon (9A4). List of the tools you'll need:
Wire brush
WD-40 spray
All-purpose cleaning spray
Copper grease
12-point socket # 30
Wheel impact socket #17
Torque wrench
Tap wrench
Hammer
Rubber mallet
Phillips screwdriver
Crow bar
Wheel chock
Replacement: wheel bearing – VW POLO Saloon (9A4). AUTODOC recommends:
  • Do not re-use the bearing assembly of your VW POLO Saloon (9A4) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • Please note: all work on the car – VW POLO Saloon (9A4) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Wheel Bearing on VW Polo 9A4 2002 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4 2003 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    VW Polo 9A4 1.4 TDI 2004 Wheel Bearing replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: wheel bearing – VW POLO Saloon (9A4). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Wheel Bearing on VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.9 SDI 2005 by yourself
    Remove the wheel.
  5. Step 6
    How to remove VW POLO 1.6 2006 Wheel Bearing - online easy-to-follow instructions
    Clean the brake drum. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Wheel Bearing on VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 2007: download PDF manuals and video instructions
    Unscrew the brake drum fastening. Use a Phillips screwdriver.
  7. Step 8
    How hard is it to do yourself: Wheel Bearing replacement on VW Polo 9A4 1.6 Flex 2008 - download illustrated guide
    Remove the brake drum.
    Replacement: wheel bearing – VW POLO Saloon (9A4). AUTODOC experts recommend:
    Examine the brake drum. Replace it if necessary.
  8. Step 9
    Need to know how to renew Wheel Bearing on VW POLO 2009? This free workshop manual will help you to do it yourself
    Remove the hub bearing protection cap. Use a hammer. Use a crowbar.
    Replacement: wheel bearing – VW POLO Saloon (9A4). Tip from AUTODOC:
    Some cars are not equipped with wheel hub caps.
  9. Step 10
    Changing of Wheel Bearing on VW Polo 9A4 2010 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the wheel hub axle nut. Use drive 12-point socket #30. Use a tap wrench.
  10. Step 11
    VW POLO 1.4 Wheel Bearing replacement: online guides and video tutorials
    Remove the hub and the bearing together, since they are a sealed unit.
  11. Step 12
    Replacing Wheel Bearing on VW Polo 9A4 2012 1.4 by yourself
    Clean the hub bearing mounting seat. Use all-purpose cleaning spray.
  12. Step 13
    Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.6 2013 Wheel Bearing DIY replacement workshop manual
    Install the new wheel hub with a bearing.
  13. Step 14
    How to change Wheel Bearing on VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 2014 - tips and tricks
    Tighten the hub. Use drive 12-point socket #30. Use a torque wrench. Tighten it to 175 nm torque.
    Replacement: wheel bearing – VW POLO Saloon (9A4). Professionals recommend:
    The wheel bearing unit must not tilt on the axle pin.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VW Polo IV Saloon (9A4, 9A2, 9N2, 9A6) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW Polo Saloon (9A4, 9A2, 9N2, 9A6) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW Polo Saloon (9A4, 9A2, 9N2, 9A6) Wheel Bearing replacement - online guide
Tips & tricks for your VW Polo Saloon (9A4, 9A2, 9N2, 9A6)
View more
  • How to change Wheel bearings on VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.9 TDi - replacement tricks
    4 reasons why your CHECK ENGINE light is on | AUTODOC tips
  • Changing Hub bearing VW Polo 9A4 1.4 - Replacement Tips
    What to do if the belt squeals | AUTODOC tips
  • Maintenance Hacks - VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4 TDI Wheel bearing kit replacement guide
    DIY brake caliper restoration | AUTODOC tips
  • Replace Wheel hub bearing on VW Polo 9A4 - free video tips
    Petrol or diesel? What's the difference between these engines? | AUTODOC