Disclaimer
How to change front anti roll bar links on TOYOTA Verso (_R2_) – replacement guide
downloads:
12
Views:
85
Important!
This replacement procedure can be used for:
TOYOTA Verso (_R2_) 1.6 (ZGR20_), TOYOTA Verso (_R2_) 1.8 (ZGR21_), TOYOTA Verso (_R2_) 2.0 D-4D (AUR20_), TOYOTA Verso (_R2_) 2.2 D-4D (AUR21_), TOYOTA Verso (_R2_) 2.2 D-CAT (AUR21_), TOYOTA Verso (_R2_) 2.0 D-4D (AUR20_), TOYOTA Verso (_R2_) 1.8 (ZGR21_), TOYOTA Verso (_R2_) 1.6 D4-D (WAR20_), TOYOTA Verso (_R2_) 1.6 (ZGR20), TOYOTA Verso (_R2_) 2.2 D-4D (AUR21) … View more
The steps may slightly vary depending on the car design.
TOYOTA Verso (_R2_) 1.6 (ZGR20_), TOYOTA Verso (_R2_) 1.8 (ZGR21_), TOYOTA Verso (_R2_) 2.0 D-4D (AUR20_), TOYOTA Verso (_R2_) 2.2 D-4D (AUR21_), TOYOTA Verso (_R2_) 2.2 D-CAT (AUR21_), TOYOTA Verso (_R2_) 2.0 D-4D (AUR20_), TOYOTA Verso (_R2_) 1.8 (ZGR21_), TOYOTA Verso (_R2_) 1.6 D4-D (WAR20_), TOYOTA Verso (_R2_) 1.6 (ZGR20), TOYOTA Verso (_R2_) 2.2 D-4D (AUR21) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Verso (_R2_) and other TOYOTA models
Alternative products
Anti-roll bar link
Wire brush
WD-40 spray
Copper grease
Drive socket # 17
Wheel impact socket #21
Torque wrench
Tap wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on TOYOTA VERSO (_AUR2_, _ZGR2_) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – TOYOTA VERSO (_AUR2_, _ZGR2_). Take the following steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #21. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. TOYOTA VERSO (_AUR2_, _ZGR2_) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17. Use a tap wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a tap wrench. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – TOYOTA VERSO (_AUR2_, _ZGR2_). AUTODOC experts recommend:Examine stabiliser bushes. Replace them if needed. - Step 10
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA Verso (AR20) model
Popular maintenance tutorials for Toyota Verso AR2
Free download PDF
2.33 MB
Free download PDF2.57 MB
Free download PDF2.78 MB
Free download PDF1.06 MB
Free download PDF593.92 KB
Free download PDF1.52 MB
Complete guides for changing the Drop links on different TOYOTA VERSO models
Free download PDF972.8 KB
Free download PDF1.61 MB
Free download PDF2.05 MB
Free download PDF1.68 MB
Free download PDF1.22 MB
Free download PDF1.32 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your TOYOTA Verso (_R2_)
View more
Revive Your Tyres: Expert Tips for a Lasting Shine | AUTODOC Guide
How to prevent car windows from fogging up | AUTODOC tips
How to Use Sandblasting Equipment: Step-by-Step Guide | AUTODOC Tips
Coolant comparison test | AUTODOC
Most commonly replaced car parts on TOYOTA VERSO
Time to replace parts? Get even better deals in our Shop app.
SCAN ME