Disclaimer
How to change front anti roll bar links on TOYOTA HILUX III Platform/Chassis (KUN1_, TGN3_, TGN2_, TGN1_, KUN2 – replacement guide
downloads:
1
Views:
61
Important!
This replacement procedure can be used for:
TOYOTA HILUX III Platform/Chassis (KUN1_, TGN3_, TGN2_, TGN1_, KUN2 3.0 D 4WD (KUN26) … View more
The steps may slightly vary depending on the car design.
TOYOTA HILUX III Platform/Chassis (KUN1_, TGN3_, TGN2_, TGN1_, KUN2 3.0 D 4WD (KUN26) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for HILUX III Platform/Chassis (KUN1_, TGN3_, TGN2_, TGN1_, KUN2 and other TOYOTA models
Anti-roll bar link
Alternative products
Anti-roll bar link
Wire brush
WD-40 spray
Copper grease
Combination spanner #17
Drive socket # 17
Drive socket # 22
HEX bit No.H6
Wheel impact socket #21
Torque wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on TOYOTA HILUX III Platform/Chassis (KUN1_, TGN3_, TGN2_, TGN1_, KUN2 in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – TOYOTA HILUX III Platform/Chassis (KUN1_, TGN3_, TGN2_, TGN1_, KUN2. Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #21. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. TOYOTA HILUX III Platform/Chassis (KUN1_, TGN3_, TGN2_, TGN1_, KUN2 - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fasteners connecting the stabilizer link to the steering knuckle. Use a combination spanner #17. Use a drive socket #17. Use HEX No.H6. - Step 8
Detach the stabilizer link from the steering knuckle. - Step 9
Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a combination spanner #17. Use HEX No.H6. - Step 10
Remove the stabilizer rod.Replacement: anti roll bar links – TOYOTA HILUX III Platform/Chassis (KUN1_, TGN3_, TGN2_, TGN1_, KUN2. Tip from AUTODOC experts:Examine stabiliser bushes. Replace them if needed. - Step 11
Treat all joints of the stabiliser link. Use copper grease. - Step 12
Ιnstall the transverse stabilizer link. - Step 13
Attach the stabilizer link to the steering knuckle.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA Hilux VII Platform / Chassis model
Popular maintenance tutorials for Toyota Hilux N30
Free download PDF
1.39 MB
Free download PDF2.32 MB
Free download PDF2.08 MB
Free download PDF2.32 MB
Complete guides for changing the Drop links on different TOYOTA HILUX models
Free download PDF1.66 MB
Free download PDF1.65 MB
Free download PDF972.8 KB
Free download PDF1.61 MB
Free download PDF2.05 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your TOYOTA HILUX III Platform/Chassis (KUN1_, TGN3_, TGN2_, TGN1_, KUN2
View more
Extend your engine's life: Avoid these 3 damaging factors | AUTODOC tips
How to Safely Wash Your Car in Winter Without Damage | AUTODOC tips
What to do if your check engine light is on | AUTODOC tips
Engine Overheating? Replace Your Cooling Fan to Fix It
Most commonly replaced car parts on TOYOTA HILUX
Time to replace parts? Get even better deals in our Shop app.
SCAN ME