Disclaimer
How to change front anti roll bar links on TOYOTA Aygo (AB40) – replacement guide
downloads:
9
Views:
247
Important!
This replacement procedure can be used for:
TOYOTA AYGO (PAB4_, KGB4_) 1.0 VVTi (KGB40), TOYOTA AYGO (PAB4_, KGB4_) 1.2 (PAB40), TOYOTA AYGO (PAB4_, KGB4_) 1.0 (KGB40) … View more
The steps may slightly vary depending on the car design.
TOYOTA AYGO (PAB4_, KGB4_) 1.0 VVTi (KGB40), TOYOTA AYGO (PAB4_, KGB4_) 1.2 (PAB40), TOYOTA AYGO (PAB4_, KGB4_) 1.0 (KGB40) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for AYGO (PAB4_, KGB4_) and other TOYOTA models
Alternative products
Anti-roll bar link
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #12
Impact socket №12
Wheel impact socket #19
Ratchet wrench
Torque wrench
Hydraulic transmission jack
Crow bar
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on TOYOTA AYGO (PAB4_, KGB4_) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – TOYOTA AYGO (PAB4_, KGB4_). Take the following steps:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. TOYOTA AYGO (PAB4_, KGB4_) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #12. - Step 8
Unscrew the fastener connecting the stabilizer bar with the control arm. Use a combination spanner #12. Use a drive socket #12. Use a ratchet wrench. - Step 9
Remove the stabilizer rod. Use a crowbar.Replacement: anti roll bar links – TOYOTA AYGO (PAB4_, KGB4_). Professionals recommend:Examine stabiliser bushes. Replace them if needed. - Step 10Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.Step 11
Install a new rod, tighten the fasteners. - Step 12
Support the arm. Use a hydraulic transmission jack. - Step 13
Tighten the fastener connecting the stabilizer bar with the control arm. Use a combination spanner #12. Use a drive socket #12. Use a torque wrench. Tighten it to 18 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA Aygo (AB40) model
Popular maintenance tutorials for Toyota Aygo AB 40
Free download PDF
2.37 MB
Free download PDF2.41 MB
Free download PDF2.7 MB
Free download PDF583.68 KB
Free download PDF2.04 MB
Free download PDF2.54 MB
Complete guides for changing the Drop links on different TOYOTA AYGO models
Free download PDF2.05 MB
Free download PDF972.8 KB
Free download PDF1.61 MB
Free download PDF1.68 MB
Free download PDF1.22 MB
Free download PDF1.32 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your TOYOTA AYGO (PAB4_, KGB4_)
View more
How I started restoring a driveshaft | Drivetrain restoration – Part 1
5 possible reasons why your car heater isn't working
Easy Steps to Paint Brake Calipers Without Special Skills or High Costs
How to make an injector test bench yourself
Most commonly replaced car parts on TOYOTA AYGO
Time to replace parts? Get even better deals in our Shop app.
SCAN ME