How to carry out replacement: Anti Roll Bar Links 1.6 16V Nissan Cube Z12
Disclaimer
Change Nissan Cube Z12 1.5 16V 4WD Anti Roll Bar Links yourself – manuals and video tutorials

How to change front anti roll bar links on NISSAN CUBE (Z12) – replacement guide

downloads: 1
Views: 23
Download your free tutorial and fix NISSAN CUBE (Z12) 1.5 16V problems yourself Download for free 1.11 MB Anti Roll Bar Links for Nissan Cube Z12 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
NISSAN CUBE (Z12) 1.6 16V, NISSAN CUBE (Z12) 1.5 dCi, NISSAN CUBE (Z12) 1.8 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for CUBE (Z12) and other NISSAN models
How to change Anti-roll bar link on Nissan Cube Z12 1.6 16V – step-by-step instructions for straightforward car repair Anti-roll bar link
How to change Anti-roll bar link on Cube (Z12) – tips for proper car maintenance
Anti-roll bar link for Cube (Z12) Petrol (110 hp)
Simple DIY car repair steps – Replacing Anti-roll bar link on Cube (Z12)
Anti-roll bar link for Cube (Z12) Diesel (106 hp)
Easy tricks to help you to replace Anti-roll bar link on Cube (Z12)
Anti-roll bar link for Cube (Z12) Petrol (120 hp)
Tools
Replacement: anti roll bar links – NISSAN CUBE (Z12). Tools you might need:
Wire brush
WD-40 spray
All-purpose cleaning spray
Ceramic grease
Torque wrench
Combination spanner #17
Drive socket # 17
HEX bit no.H5.
Wheel impact socket #17
Ratchet wrench
Tap wrench
Wheel chock
Buy tools
AUTODOC recommends:
  • Replace the stabiliser links on NISSAN CUBE (Z12) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – NISSAN CUBE (Z12). Take the following steps:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Anti Roll Bar Links on Nissan Cube Z12 2007 - free PDF and video manuals
    Loosen the wheel bolts. Use wheel impact socket #17. Use a tap wrench.
  2. Step 3
    Raise the car.
    Replacement: anti roll bar links – NISSAN CUBE (Z12). AUTODOC recommends:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 4
    How to replace NISSAN CUBE (Z12) 1.6 16V 2008 Anti Roll Bar Links - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  3. Step 5
    Nissan Cube Z12 1.5 dCi 2009 Anti Roll Bar Links replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Anti Roll Bar Links on NISSAN CUBE (Z12) 1.5 16V 4WD 2010 by yourself
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove NISSAN CUBE 1.8 2011 Anti Roll Bar Links - online easy-to-follow instructions
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #17. Use HEX No.H5. Use a ratchet wrench.
  6. Step 8
    How to replace Anti Roll Bar Links on NISSAN CUBE (Z12) 2012: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use HEX No.H5. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Anti Roll Bar Links replacement on Nissan Cube Z12 1.5 dCi 2013 - download illustrated guide
    Remove the stabiliser link.
  8. Step 10
    Need to know how to renew Anti Roll Bar Links on NISSAN CUBE 2014? This free workshop manual will help you to do it yourself
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use all-purpose cleaning spray.
  9. Step 11
    Changing of Anti Roll Bar Links on Nissan Cube Z12 2015 won't be an issue if you follow this illustrated step-by-step guide
    Install a new stabiliser link and tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the NISSAN Cube (Z12) model.

Browse tyres

Popular maintenance tutorials for Nissan Cube Z12

More manuals for Nissan Cube Z12

Complete guides for changing the Drop links on different NISSAN CUBE models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
NISSAN CUBE (Z12) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY NISSAN CUBE (Z12) Anti Roll Bar Links replacement - online guide
Tips & tricks for your NISSAN CUBE (Z12)
View more
  • How to change Drop links on NISSAN CUBE (Z12) 1.5 16V - replacement tricks
    How to fix your car with AUTODOC CLUB
    16K views
    Published on: 30/11/2021
  • Changing Stabilizer link Nissan Cube Z12 1.6 16V - Replacement Tips
    8 bad driving habits | AUTODOC tips
    4K views
    Published on: 01/04/2021
  • Maintenance Hacks - NISSAN CUBE (Z12) 1.5 dCi Sway bar link replacement guide
    How to clean an engine bay | AUTODOC
    6K views
    Published on: 11/09/2020
  • Replace Drop link on Nissan Cube Z12 - free video tips
    How to start a car after a long idle period | AUTODOC tips
    6K views
    Published on: 20/05/2021

Most commonly replaced car parts on NISSAN CUBE

Professional manuals for the most common NISSAN models