Important!

This replacement procedure can be used for:
NISSAN X-TRAIL (T30) 2.0 4x4, NISSAN X-TRAIL (T30) 2.2 Di 4x4, NISSAN X-TRAIL (T30) 2.2 dCi 4x4, NISSAN X-TRAIL (T30) 2.0, NISSAN X-TRAIL (T30) 2.2 dCi, NISSAN X-TRAIL (T30) 2.0, NISSAN X-TRAIL (T30) 2.5 4x4, NISSAN X-TRAIL (T30) 2.0 4x4, NISSAN X-TRAIL (T30) 2.0 4x4, NISSAN X-TRAIL (T30) 2.2 DCi, NISSAN X-TRAIL (T30) 2.2 DCi FWD, NISSAN X-TRAIL (T30) 2.5 4x4 … View more

The steps may slightly vary depending on the car design.

How to change front anti roll bar link on NISSAN X TRAIL T30 [TUTORIAL AUTODOC]

Alternative products

Anti-roll bar link

Replacement: anti roll bar links – Nissan X Trail T30. Tools you might need:

                      Wire brush
                    
                      WD-40 spray
                    
                      Brake cleaner 
                    
                      Ceramic grease
                    
                      Copper grease 
                    
                      Torque wrench
                    
                      Combination spanner #17
                    
                      Drive socket # 17
                    
                      HEX bit No.H6
                    
                      Wheel impact socket #21
                    
                      Ratchet wrench
                    
                      Wheel chock

Buy tools

AUTODOC recommends:

Replace the stabiliser links on Nissan X Trail T30 in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
Please note: all work on the car – Nissan X Trail T30 – should be done with the engine switched off.

Carry out replacement in the following order:

Step 1

Secure the wheels with chocks.

Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #21.
Step 3

Raise the car.

Replacement: anti roll bar links – Nissan X Trail T30. Tip:
If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
Step 4

Unscrew the wheel bolts.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Nissan X Trail T30
Step 5

Remove the wheel.
Step 6

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 7

Unscrew the fastener connecting the stabilizer link to the control arm. Use a drive socket #17. Use a ratchet wrench.
Step 8

Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use HEX No.H6. Use a ratchet wrench.
Step 9

Remove the stabilizer rod.

Replacement: anti roll bar links – Nissan X Trail T30. Tip from AUTODOC experts:
Examine stabiliser bushes. Replace them if needed.
Step 10

Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 11

Ιnstall the transverse stabilizer link.
Step 12

Tighten the fastener connecting the sway bar link to the suspension arm. Use a drive socket #17. Use a torque wrench. Tighten it to 75 Nm torque.
Step 13

Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17. Use a torque wrench. Tighten it to 75 Nm torque.
Step 14

Treat all joints of the stabiliser link. Use copper grease.
Step 15

Clean the wheel rim mounting seat. Use a wire brush.
Step 16

Treat the surface where the brake disc contacts the wheel rim. Use ceramic grease.
Step 17

Clean the brake disk surface. Use a brake cleaner.

AUTODOC recommends:
Replacement: anti roll bar links – Nissan X Trail T30. After applying the spray, wait a few minutes.
Step 18

Install the wheel.

AUTODOC recommends:
Important! Hold the wheel while screwing in the fastening bolts. Nissan X Trail T30
Step 19

Screw in the wheel bolts. Use wheel impact socket #21.
Step 20

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #21. Use a torque wrench. Tighten it to 118 Nm torque.
Step 21

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Need New Tyres?

Find out which tyre and wheel sizes are compatible with the NISSAN X-Trail (T30) model

Nissan X Trail t30 tyre size

How to change front wheel bearing on Nissan X Trail T30 – replacement guide

Free download PDF
4.45 MB
How to change front lower arm on Nissan X Trail T30 – replacement guide

Free download PDF
1.87 MB
How to change track rod end on Nissan X Trail T30 – replacement guide

Free download PDF
1.46 MB
How to change front strut mount on Nissan X Trail T30 – replacement guide

Free download PDF
1.91 MB
How to change rear suspension lower trailing arm on Nissan X Trail T30 – replacement guide

Free download PDF
1.47 MB
How to change rear anti roll bar links on Nissan X Trail T30 – replacement guide

Free download PDF
1.2 MB

How to change rear anti roll bar links on Nissan X Trail T30 – replacement guide

Free download PDF
1.2 MB
How to change front anti roll bar links on NISSAN X-Trail (T31) – replacement guide

Free download PDF
1.23 MB
How to change anti roll bar links on a car – replacement tutorial

Universal

Free download PDF
972.8 KB
How to change front anti roll bar links on Nissan Qashqai J10 – replacement guide

Free download PDF
1.26 MB
How to change front anti roll bar links on Nissan Micra K12 – replacement guide

Free download PDF
1.18 MB
How to change front anti roll bar links on NISSAN Kubistar Van (X76) – replacement guide

Free download PDF
1.17 MB

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

How to Get the Best Deals on Car Parts | Save Money with AUTODOC

2K views

Published on: 03/02/2022
DIY alternator repair | AUTODOC tips

2M views

Published on: 30/11/2022
#DIY Wheel Rim Restoration: Revive Scratches and Chips Easily!

7K views

Published on: 18/07/2024
Kolbenschmidt plastic gauge overview

3K views

Published on: 23/04/2025