Disclaimer
How to change front anti roll bar links on NISSAN Kubistar Van (X76) – replacement guide
downloads:
3
Views:
34
Important!
This replacement procedure can be used for:
NISSAN Kubistar Van (X76) 1.5 dCi, NISSAN Kubistar Van (X76) 1.2, NISSAN Kubistar Van (X76) 1.2 16V, NISSAN Kubistar Van (X76) 1.6 16V, NISSAN Kubistar Van (X76) 1.5 dCi, NISSAN Kubistar Van (X76) 1.5 dCi, NISSAN Kubistar Van (X76) 1.5 dCi 70, NISSAN Kubistar Van (X76) dCi 85, NISSAN Kubistar Van (X76) 1.5 dCi, NISSAN Kubistar Van (X76) 1.4 … View more
The steps may slightly vary depending on the car design.
NISSAN Kubistar Van (X76) 1.5 dCi, NISSAN Kubistar Van (X76) 1.2, NISSAN Kubistar Van (X76) 1.2 16V, NISSAN Kubistar Van (X76) 1.6 16V, NISSAN Kubistar Van (X76) 1.5 dCi, NISSAN Kubistar Van (X76) 1.5 dCi, NISSAN Kubistar Van (X76) 1.5 dCi 70, NISSAN Kubistar Van (X76) dCi 85, NISSAN Kubistar Van (X76) 1.5 dCi, NISSAN Kubistar Van (X76) 1.4 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Kubistar Van (X76) and other NISSAN models
Alternative products

Wire brush
WD-40 spray
Copper grease
Drive socket # 13
Torx bit T45
Wheel impact socket #19
Ratchet wrench
Torque wrench
Hydraulic transmission jack
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on NISSAN KUBISTAR Box (X80) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – NISSAN KUBISTAR Box (X80). Use the following procedure:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: anti roll bar links – NISSAN KUBISTAR Box (X80). Tip from AUTODOC experts:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the stabilizer rod fasteners. Use a drive socket #13. Use a ratchet wrench. - Step 8
Remove the stabilizer rod.Replacement: anti roll bar links – NISSAN KUBISTAR Box (X80). Tip from AUTODOC:Examine stabiliser bushes. Replace them if needed. - Step 9
Clean all joints of the stabiliser link. Use a wire brush. Treat all joints of the stabiliser link. Use WD-40 spray. - Step 10
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the NISSAN Kubistar Van (X76) model
Popular maintenance tutorials for Nissan Kubistar Van X80
Complete guides for changing the Drop links on different NISSAN KUBISTAR models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your NISSAN Kubistar Van (X76)
View more
Prevent Breakdowns: Key Car Checks After Winter | AUTODOC Guide
What to do if your check engine light is on | AUTODOC tips
The Ultimate Guide to Engine Bay Cleaning | AUTODOC
TOP 6 WD-40 lifehacks | AUTODOC tips
Most commonly replaced car parts on NISSAN KUBISTAR
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



























