How to carry out replacement: Poly V-Belt 1.6 16V Nissan Cube Z12
Disclaimer
Change Nissan Cube Z12 1.5 16V 4WD Poly V-Belt yourself – manuals and video tutorials

How to change serpentine belt on NISSAN CUBE (Z12) – replacement guide

downloads: 15
Views: 368
Download your free tutorial and fix NISSAN CUBE (Z12) 1.5 16V problems yourself Download for free 1.62 MB Poly V-Belt for Nissan Cube Z12 Shop now
Leave a comment Open in a new tab
When to replace the Poly V-Belt on your NISSAN CUBE
Recommended replacement interval for the part category Serpentine belt : 6 year / 160000 km
Important!
This replacement procedure can be used for:
NISSAN CUBE (Z12) 1.5 dCi, NISSAN CUBE (Z12) 1.5 dCi … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for CUBE (Z12) and other NISSAN models
How to change Serpentine belt on Nissan Cube Z12 1.6 16V – step-by-step instructions for straightforward car repair Serpentine belt
How to change Serpentine belt on Cube (Z12) – tips for proper car maintenance
Serpentine belt for Cube (Z12) Diesel (110 hp)
Simple DIY car repair steps – Replacing Serpentine belt on Cube (Z12)
Serpentine belt for Cube (Z12) Diesel (106 hp)
Tools
Replacement: serpentine belt – NISSAN CUBE (Z12). Tools you need:
Torque wrench
Combination spanner #10
Combination spanner #16
Drive socket # 13
Wheel impact socket #17
Ratchet wrench
Clip removal tool
Fender cover
Wheel chock
Buy tools
Replacement: serpentine belt – NISSAN CUBE (Z12). AUTODOC recommends:
  • All work should be done with the engine stopped.
Replacement: serpentine belt – NISSAN CUBE (Z12). Use the following procedure:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Poly V-Belt on Nissan Cube Z12 2007 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 4
    How to replace NISSAN CUBE (Z12) 1.6 16V 2008 Poly V-Belt - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 5
    Raise the front of the car and secure on supports.
    Step 6
    Nissan Cube Z12 1.5 dCi 2009 Poly V-Belt replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. NISSAN CUBE (Z12)
  4. Step 7
    Changing Poly V-Belt on NISSAN CUBE (Z12) 1.5 16V 4WD 2010 by yourself
    Remove the wheel.
  5. Step 8
    How to remove NISSAN CUBE 1.8 2011 Poly V-Belt - online easy-to-follow instructions
    Remove the wheel arch cover. Use a clip removal tool.
  6. Step 9
    How to replace Poly V-Belt on NISSAN CUBE (Z12) 2012: download PDF manuals and video instructions
    Unscrew the fuel filter bracket fixing bolts. Use a drive socket #13. Use a ratchet wrench.
  7. Step 10
    How hard is it to do yourself: Poly V-Belt replacement on Nissan Cube Z12 1.5 dCi 2013 - download illustrated guide
    Remove the fuel filter fastening bracket.
  8. Step 11
    Need to know how to renew Poly V-Belt on NISSAN CUBE 2014? This free workshop manual will help you to do it yourself
    Unscrew the fuel filter bracket fixing bolts. Use a combination spanner #10.
  9. Step 12
    Changing of Poly V-Belt on Nissan Cube Z12 2015 won't be an issue if you follow this illustrated step-by-step guide
    Remove the fuel filter fastening bracket.
  10. Step 13
    NISSAN CUBE 1.5 16V 4WD Poly V-Belt replacement: online guides and video tutorials
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
  11. Step 14
    Replacing Poly V-Belt on Nissan Cube Z12 2017 1.6 16V by yourself
    Remove the V-ribbed belt.
  12. Step 15
    Return the tensioner pulley to its initial position.
    Replacement: serpentine belt – NISSAN CUBE (Z12). Tip:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
    Step 16
    CUBE (Z12) 1.8 2018 Poly V-Belt DIY replacement workshop manual
    Install the V-ribbed belt.
    AUTODOC recommends:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  13. Step 17
    How to change Poly V-Belt on NISSAN CUBE (Z12) 2019 - tips and tricks
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
  14. Step 18
    Step-by-step recommendations for DIY replacement Nissan Cube Z12 2020 1.8 Poly V-Belt
    Place the V-ribbed belt on the tensioner pulley.
  15. Step 19
    DIY replacement of Poly V-Belt on NISSAN CUBE (Z12) 1.5 16V 2021 is not an issue anymore with our step-by-step tutorial
    Return the tensioner pulley to its initial position.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the NISSAN Cube (Z12) model.

Browse tyres

Popular maintenance tutorials for Nissan Cube Z12

More manuals for Nissan Cube Z12

Complete guides for changing the Alternator belt on different NISSAN CUBE models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
NISSAN CUBE (Z12) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY NISSAN CUBE (Z12) Poly V-Belt replacement - online guide
Tips & tricks for your NISSAN CUBE (Z12)
View more
  • How to change Alternator belt on NISSAN CUBE (Z12) 1.5 16V - replacement tricks
    Things you should never do with your manual transmission | AUTODOC tips
    5K views
    Published on: 20/10/2020
  • Changing Auxiliary belt Nissan Cube Z12 1.6 16V - Replacement Tips
    The most common problems when buying a used car | AUTODOC
    4K views
    Published on: 10/11/2022
  • Maintenance Hacks - NISSAN CUBE (Z12) 1.5 dCi Poly V-belt replacement guide
    Things you should never do with an automatic transmission | AUTODOC tips
    6K views
    Published on: 26/01/2021
  • Replace Drive belt on Nissan Cube Z12 - free video tips
    Headlight Restoration | AUTODOC tips
    8K views
    Published on: 13/01/2021

Most commonly replaced car parts on NISSAN CUBE

Professional manuals for the most common NISSAN models