Disclaimer
How to change pollen filter on NISSAN Cube (Z12) – replacement guide
downloads:
10
Views:
149
Recommended replacement interval for the part category Pollen filter : 1 year / 20000 km
Important!
This replacement procedure can be used for:
NISSAN CUBE (Z12) 1.5 16V, NISSAN CUBE (Z12) 1.5 dCi, NISSAN CUBE (Z12) 1.6 16V, NISSAN CUBE (Z12) 1.5 dCi … View more
The steps may slightly vary depending on the car design.
NISSAN CUBE (Z12) 1.5 16V, NISSAN CUBE (Z12) 1.5 dCi, NISSAN CUBE (Z12) 1.6 16V, NISSAN CUBE (Z12) 1.5 dCi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Pollen Filter for CUBE (Z12) and other NISSAN models
Alternative products

Phillips screwdriver
Replacement: pollen filter – NISSAN CUBE (Z12). Tip from AUTODOC:
- Replace the cabin filter at least once every six months, in early spring and autumn seasons.
- Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
- If the air flow into the cabin has sharply reduced, replace the filter before a scheduled maintenance.
- All work should be done with the engine stopped.
Replacement: pollen filter – NISSAN CUBE (Z12). Use the following procedure:
- Step 1
Move the passenger seat fully backwards. - Step 2
Remove the protective cover under the glove box. - Step 3
Open the glove box. - Step 4
Unscrew the glove box fastening screws. Use a Phillips screwdriver. - Step 5
Pry up, carefully release from the fasteners and remove the side trim panel on the passenger side. - Step 6
Remove the glovebox.Replacement: pollen filter – NISSAN CUBE (Z12). AUTODOC experts recommend:Be careful to avoid damaging the glove compartment fasteners. - Step 7
Remove the cabin filter housing cover. - Step 8
Remove the cabin filter.Replacement: pollen filter – NISSAN CUBE (Z12). Tip from AUTODOC experts:Do not attempt to clean and reuse the filter - it will affect the quality of air cleaning inside the car. - Step 9
Install the cabin filter to its mounting seat.AUTODOC recommends:Replacement: pollen filter – NISSAN CUBE (Z12). Be sure to position the filtering element correctly. Avoid misalignment.Follow the air flow direction arrow on the filter.Attention! Use quality filters – NISSAN CUBE (Z12). - Step 10
Reinstall the cabin filter housing cover. Make sure you hear a click indicating that it is locked in place. - Step 11
Install the glove box.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the NISSAN Cube (Z12) model
Popular maintenance tutorials for Nissan Cube Z12
Complete guides for changing the Pollen filter on different NISSAN CUBE models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your NISSAN CUBE (Z12)
View more
Understanding Airbag Light Warnings | Essential Tips for Car Safety
How to Safely Wash Your Car in Winter Without Damage | AUTODOC tips
CHECK ENGINE light turned on – step-by-step guide on what to do
Top 5 possible reasons your car is shaking or vibrating
Most commonly replaced car parts on NISSAN CUBE
Time to replace parts? Get even better deals in our Shop app.

SCAN ME






















