Important!
This replacement procedure can be used for:
FORD MONDEO III Estate (BWY) 2.2 TDCi, FORD MONDEO III Estate (BWY) 1.8 16V, FORD MONDEO III Estate (BWY) 2.0 16V, FORD MONDEO III Estate (BWY) 2.5 V6 24V, FORD MONDEO III Estate (BWY) 2.0 16V DI / TDDi / TDCi, FORD MONDEO III Estate (BWY) 2.0 16V TDDi / TDCi, FORD MONDEO III Estate (BWY) 2.0 TDCi, FORD MONDEO III Estate (BWY) ST220, FORD MONDEO III Estate (BWY) 1.8 SCi, FORD MONDEO III Estate (BWY) 2.2 TDCi, FORD MONDEO III Estate (BWY) 3.0 V6 24V View more

The steps may slightly vary depending on the car design.

How to change tie rod end / track rod end on FORD MONDEO 3 TUTORIAL | AUTODOC

video
All the parts you need to replace – Track Rod End for MONDEO III Estate (BWY) and other FORD models
How to change Track rod end on Ford Mondeo bwy 2.0 16V – step-by-step instructions for straightforward car repair
Track rod end
How to change Rod Assembly on Ford Mondeo bwy 2.0 16V – step-by-step instructions for straightforward car repair
Rod Assembly
How to change Repair Kit, tie rod on Ford Mondeo bwy 2.0 16V – step-by-step instructions for straightforward car repair
Repair Kit, tie rod
How to change Mounting Kit, tie rod end on Ford Mondeo bwy 2.0 16V – step-by-step instructions for straightforward car repair
Mounting Kit, tie rod end
Tools
Replacement: track rod end – Ford Mondeo BWY. List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #24
Drive socket # 15
Wheel impact socket #19
Ratchet wrench
Torque wrench
Vernier caliper
Ball joint puller
Wheel chock
Replacement: track rod end – Ford Mondeo BWY. AUTODOC experts recommend:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • Please note: all work on the car – Ford Mondeo BWY – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Track Rod End on Ford Mondeo bwy 2000 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace FORD MONDEO III Estate (BWY) 2.0 16V 2001 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Ford Mondeo bwy 2.0 TDCi 2002 Track Rod End replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: track rod end – Ford Mondeo BWY. AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Track Rod End on FORD MONDEO III Estate (BWY) 1.8 16V 2003 by yourself
    Remove the wheel.
  5. Step 6
    How to remove FORD MONDEO 2.2 TDCi 2004 Track Rod End - online easy-to-follow instructions
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  6. Step 7
    How to replace Track Rod End on FORD MONDEO III Estate (BWY) 2005: download PDF manuals and video instructions
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  7. Step 8
    How hard is it to do yourself: Track Rod End replacement on Ford Mondeo bwy ST220 3.0 2006 - download illustrated guide
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #15. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Track Rod End on FORD MONDEO 2007? This free workshop manual will help you to do it yourself
    Clean the lock nut that connects the tie rod to the tie rod end. Use a wire brush. Use WD-40 spray.
  9. Step 10
    Changing of Track Rod End on Ford Mondeo bwy 2000 won't be an issue if you follow this illustrated step-by-step guide
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #24.
  10. Step 11
    FORD MONDEO 1.8 SCi Track Rod End replacement: online guides and video tutorials
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  11. Step 12
    Replacing Track Rod End on Ford Mondeo bwy 2002 2.0 16V by yourself
    Screw the end out of the tie rod.
  12. Step 13
    MONDEO III Estate (BWY) 2.2 TDCi 2003 Track Rod End DIY replacement workshop manual
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  13. Step 14
    How to change Track Rod End on FORD MONDEO III Estate (BWY) 2004 - tips and tricks
    Screw on a new tie rod end.
    Replacement: track rod end – Ford Mondeo BWY. Tip:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
FORD MONDEO III Estate (BWY) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY FORD MONDEO III Estate (BWY) Track Rod End replacement - online guide
Tips & tricks for your FORD MONDEO III Estate (BWY)
View more
  • How to change Tie rod end on FORD MONDEO III Estate (BWY) 2.0 16V TDDi / TDCi - replacement tricks
    Things you should never do with your manual transmission | AUTODOC tips
  • Changing Outer tie rod Ford Mondeo bwy 2.0 16V - Replacement Tips
    DIY alternator repair | AUTODOC tips
  • Maintenance Hacks - FORD MONDEO III Estate (BWY) 2.0 TDCi Track rod end ball joint replacement guide
    Top 5 mistakes when replacing spark plugs | AUTODOC tips
  • Replace Outer tie rod end on Ford Mondeo bwy - free video tips
    How to replace a wheel stud | AUTODOC tips