Important!

This replacement procedure can be used for:
FIAT PANDA (169) 1.2 4x4 (169.AXB2A), FIAT PANDA (169) 1.2 Natural Power (169.AXB1A), FIAT PANDA (169) 1.2 LPG (169.AXB1A), FIAT PANDA (169) 1.2 (169AXF2A, 169AXF1A), FIAT PANDA (169) 1.4 Natural Power (169AXHIA), FIAT PANDA (169) 1.3 JTD Multijet 4x4 (169AXG1A, 169AXG2A), FIAT PANDA (169) 1.2 4x4 (169AXF2A, 169AXF1A), FIAT PANDA (169) 1.2 LPG (169CXF1A), FIAT PANDA (169) 1.1 (169.AXA1A), FIAT PANDA (169) 1.3 D Multijet (169.AXC1A), FIAT PANDA (169) 1.3 D Multijet 4x4 (169.AXC2A), FIAT PANDA (169) 1.4 (169AXE1B), FIAT PANDA (169) 1.3 D Multijet (169AXG1A, 169AXD1A) … View more

The steps may slightly vary depending on the car design.

How to change front anti roll bar link on FIAT PANDA (169) [TUTORIAL AUTODOC]

All the parts you need to replace – Anti Roll Bar Links for PANDA (169) and other FIAT models

Alternative products

Anti-roll bar link

SKST-0230017 STARK Anti-roll bar link

8,68 GBP

Shop

27433 FEBI BILSTEIN Anti-roll bar link

8,77 GBP

Shop

3229S0018P RIDEX PLUS Anti-roll bar link

10,45 GBP

Shop

TC1406 DELPHI Anti-roll bar link

11,03 GBP

Shop

19162 SIDEM Anti-roll bar link

11,10 GBP

Shop

4303112 KRAFT Anti-roll bar link

13,03 GBP

Shop

53019918 METZGER Anti-roll bar link

14,58 GBP

Shop

49066HPS MAPCO Anti-roll bar link

16,87 GBP

Shop

30-62559 DYS Anti-roll bar link

17,84 GBP

Shop

QLS3373S QUINTON HAZELL Anti-roll bar link

19,72 GBP

Shop

Replacement: anti roll bar links – Fiat Panda 169. Tools you'll need:

                      Wire brush
                    
                      WD-40 spray
                    
                      Brake cleaner 
                    
                      Copper grease 
                    
                      Torque wrench
                    
                      Combination spanner #16
                    
                      Drive socket # 16 
                    
                      Drive socket # 17 
                    
                      HEX bit No.H6.
                    
                      Wheel impact socket #17
                    
                      Ratchet wrench
                    
                      Wheel chock

Buy tools

Replacement: anti roll bar links – Fiat Panda 169. AUTODOC recommends:

Replace the stabiliser links on Fiat Panda 169 in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
Please note: all work on the car – Fiat Panda 169 – should be done with the engine switched off.

Carry out replacement in the following order:

Step 1

Secure the wheels with chocks.

Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 3

Raise the front of the car and secure on supports.
Step 4

Unscrew the wheel bolts.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Fiat Panda 169
Step 5

Remove the wheel.
Step 6

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 7

Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use HEX No.H6. Use a ratchet wrench.
Step 8

Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #16. Use a ratchet wrench.
Step 9

Remove the stabilizer rod.

Replacement: anti roll bar links – Fiat Panda 169. Tip:
Examine stabiliser bushes. Replace them if needed.
Step 10

Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 11

Install a new rod, tighten the fasteners.
Step 12

Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17. Use a torque wrench. Tighten it to 23 Nm torque.
Step 13

Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a torque wrench. Tighten it to 23 Nm torque.
Step 14

Treat all joints of the stabiliser link. Use copper grease.
Step 15

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 16

Clean the brake disk surface. Use a brake cleaner.

AUTODOC recommends:
Replacement: anti roll bar links – Fiat Panda 169. After applying the spray, wait a few minutes.
Step 17

Install the wheel.

AUTODOC recommends:
Important! Hold the wheel while screwing in the fastening bolts. Fiat Panda 169
Step 18

Screw in the wheel bolts. Use wheel impact socket #17.
Step 19

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #17. Use a torque wrench. Tighten it to 98 nm torque.
Step 20

Remove the jacks and chocks.

Comments – 1

@user_1557119

24.04.2023 20:51

Member

O manual foi de grande utilidade para mim, não tinha idéias de quão fácil era!

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the FIAT Panda II Hatchback (169) model.

Fiat Panda Mk2 tyre size

How to change front lower arm on Fiat Panda 169 – replacement guide

Free download PDF
1.96 MB
How to change front strut mount on Fiat Panda 169 – replacement guide

Free download PDF
3.06 MB
How to change rear wheel bearing on Fiat Panda 169 – replacement guide

Free download PDF
1.57 MB
How to change front wheel bearing on Fiat Panda 169 – replacement guide

Free download PDF
4.42 MB
How to change front brake pads on Fiat Panda 169 – replacement guide

Free download PDF
2.51 MB
How to change front brake discs on Fiat Panda 169 – replacement guide

Free download PDF
2.17 MB

How to change front anti roll bar links on FIAT Panda Hatchback (312_, 319_) – replacement guide

Free download PDF
1.71 MB
How to change anti roll bar links on a car – replacement tutorial

Universal

Free download PDF
972.8 KB
How to change front anti roll bar links on Fiat Punto 188 – replacement guide

Free download PDF
1.31 MB
How to change front anti roll bar links on Fiat Punto 199 – replacement guide

Free download PDF
1.37 MB
How to change front anti roll bar links on Fiat Bravo 2 – replacement guide

Free download PDF
1.77 MB
How to change front anti roll bar links on FIAT STILO (192) – replacement guide

Free download PDF
1.7 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

Easy Steps to Fix Minor Scratches on Your Vehicle | AUTODOC tips

8K views

Published on: 12/05/2022
#DIY guide: Changing your car's color with a spray can | AUTODOC tips

5K views

Published on: 25/03/2021
Coolant comparison test | AUTODOC

12K views

Published on: 18/02/2021
Top 5 reasons why your car squeals | AUTODOC Tips

6K views

Published on: 26/10/2023