Important!

This replacement procedure can be used for:
FIAT Panda Hatchback (312_, 319_) 1.2 (312PXA1A), FIAT Panda Hatchback (312_, 319_) 1.3 D Multijet (312PXL1A), FIAT Panda Hatchback (312_, 319_) 0.9 (312PXG1A), FIAT Panda Hatchback (312_, 319_) 0.9 (312PXH1A), FIAT Panda Hatchback (312_, 319_) 0.9 (312PXN1A, 312PXN11), FIAT Panda Hatchback (312_, 319_) 0.9 Natural Power (312PXG1A, 312PYC1A), FIAT Panda Hatchback (312_, 319_) 1.3 D Multijet 4x4 (312PXL1A), FIAT Panda Hatchback (312_, 319_) 0.9 4x4 (312PXG1A), FIAT Panda Hatchback (312_, 319_) 1.2 LPG (312PXA1A), FIAT Panda Hatchback (312_, 319_) 0.9 (312PXP1A), FIAT Panda Hatchback (312_, 319_) 0.9 (312PXN1A, 312PXN11), FIAT Panda Hatchback (312_, 319_) 0.9 4x4 (312PXR2B), FIAT Panda Hatchback (312_, 319_) 1.3 D Multijet 4x4 (312PXS2A), FIAT Panda Hatchback (312_, 319_) 0.9 Natural Power (312PXN1A), FIAT Panda Hatchback (312_, 319_) 1.3 D Multijet (312PXU1A, 312PXW1A), FIAT Panda Hatchback (312_, 319_) 1.3 D Multijet 4x4 (312PXU1A) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for Panda Hatchback (312_, 319_) and other FIAT models

Alternative products

Anti-roll bar link

SKST-0230387 STARK Anti-roll bar link

5,65 GBP

Shop

SKST-0230037 STARK Anti-roll bar link

6,74 GBP

Shop

SKST-0230005 STARK Anti-roll bar link

8,27 GBP

Shop

SKST-0230254 STARK Anti-roll bar link

9,42 GBP

Shop

722 546 TOPRAN Anti-roll bar link

11,65 GBP

Shop

TC2222 DELPHI Anti-roll bar link

12,73 GBP

Shop

QLS3615S QUINTON HAZELL Anti-roll bar link

13,10 GBP

Shop

19167 SIDEM Anti-roll bar link

13,64 GBP

Shop

818 0230 10 FAG Anti-roll bar link

13,92 GBP

Shop

CI-LS-7297 MOOG Anti-roll bar link

14,28 GBP

Shop

Replacement: anti roll bar links – FIAT PANDA (312). Tools you might need:

                      Wire brush
                    
                      WD-40 spray
                    
                      Copper grease 
                    
                      HEX bit No.H5
                    
                      Combination spanner #17
                    
                      Drive socket # 10 
                    
                      Drive socket # 17 
                    
                      Wheel impact socket #17
                    
                      Ratchet wrench
                    
                      Torque wrench
                    
                      Phillips Screwdriver
                    
                      Hydraulic transmission jack
                    
                      Wheel chock

Buy tools

AUTODOC recommends:

Replace the stabiliser links on FIAT PANDA (312) in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
All work should be done with the engine stopped.

Replacement: anti roll bar links – FIAT PANDA (312). Recommended sequence of steps:

Step 1

Secure the wheels with chocks.
Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 3

Raise the front of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. FIAT PANDA (312)
Step 5

Remove the wheel.
Step 6

Chock the opposite wheel. Use a hydraulic transmission jack.
Step 7

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 8

Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a ratchet wrench.
Step 9

Unscrew and remove the wheel arch cover fasteners. Use a drive socket #10. Use a ratchet wrench. Use a Phillips screwdriver.
Step 10

Remove the wheel arch cover.
Step 11

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 12

Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use HEX No.H5. Use a combination spanner #17. Use a ratchet wrench.
Step 13

Remove the stabilizer rod.

Replacement: anti roll bar links – FIAT PANDA (312). Professionals recommend:
Examine stabiliser bushes. Replace them if needed.
Step 14

Install a new rod, tighten the fasteners.
Step 15

Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use HEX No.H5. Use a torque wrench. Tighten it to 55 Nm torque.
Step 16

Remove the hydraulic transmission jack.

Replacement: anti roll bar links – FIAT PANDA (312). Tip from AUTODOC experts:
Lower the hydraulic transmission jack smoothly, without jerks, to avoid damaging assemblies and mechanisms.
Step 17

Tighten the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #17. Use HEX No.H5. Use a torque wrench. Tighten it to 55 Nm torque.
Step 18

Install the wheel arch cover to its mounting seat.
Step 19

Install and tighten the wheel arch cover fasteners. Use a drive socket #10. Use a ratchet wrench. Use a Phillips screwdriver.
Step 20

Clean the wheel rim mounting seat. Use a wire brush. Treat the contacting surface. Use copper grease.

Step 21

Install the wheel.

AUTODOC recommends:
Important! Hold the wheel while screwing in the fastening bolts. FIAT PANDA (312)
Step 22

Screw in the wheel bolts. Use wheel impact socket #17.
Step 23

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #17. Use a torque wrench. Tighten it to 120 Nm torque.
Step 24

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the FIAT Panda III Hatchback (312, 319) model.

Fiat Panda 312 tyre size

How to change rear wheel bearing on FIAT Panda Hatchback (312_, 319_) – replacement guide

Free download PDF
2.44 MB
How to change front brake discs on FIAT Panda Hatchback (312_, 319_) – replacement guide

Free download PDF
2.07 MB
How to change rear brake discs on FIAT Panda Hatchback (312_, 319_) – replacement guide

Free download PDF
1.92 MB
How to change spark plugs on FIAT Panda Hatchback (312_, 319_) – replacement guide

Free download PDF
1.37 MB
How to change rear windshield wipers on FIAT Panda III Hatchback (312, 319) – replacement guide

Free download PDF
1.47 MB
How to change engine oil and filter on FIAT Panda Hatchback (312_, 319_) – replacement guide

Free download PDF
1.88 MB

How to change front anti roll bar links on Fiat Panda 169 – replacement guide

Free download PDF
1.28 MB
How to change anti roll bar links on a car – replacement tutorial

Universal

Free download PDF
972.8 KB
How to change front anti roll bar links on Fiat Punto 188 – replacement guide

Free download PDF
1.31 MB
How to change front anti roll bar links on Fiat Punto 199 – replacement guide

Free download PDF
1.37 MB
How to change front anti roll bar links on Fiat Bravo 2 – replacement guide

Free download PDF
1.77 MB
How to change front anti roll bar links on FIAT STILO (192) – replacement guide

Free download PDF
1.7 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

Top 5 Car Interior Cleaning Mistakes You Should Avoid | AUTODOC Tips

6K views

Published on: 26/05/2022
What to do if the ABS light comes on: DIY Diagnostics Tips

7K views

Published on: 11/03/2021
How to replace the suspension on a BMW E30 Turbo | SUPERCAR AUTODOC

1K views

Published on: 04/03/2021
#DIY guide: Changing your car's color with a spray can | AUTODOC tips

5K views

Published on: 25/03/2021