Important!
This replacement procedure can be used for:
FIAT PALIO (178BX) 1.2, FIAT PALIO Weekend (178DX) 1.2, FIAT PUNTO (188) 1.2 60 (188.030, .050, .130, .150, .230, .250), FIAT Siena (178_, 172_) 1.2, FIAT PUNTO Van (188AX) 1.2 60, FIAT PANDA (169) 1.2, FIAT PANDA Van (169) 1.2 4x4

The steps may slightly vary depending on the car design.

How to change rear wheel bearing on FIAT PANDA (169) [TUTORIAL AUTODOC]

Replacement: wheel bearing – Fiat Panda 169. Tools you might need:
Replacement: wheel bearing – Fiat Panda 169. Tools you might need:
Wire brush
WD-40 spray
Copper grease
All-purpose cleaning spray
Torque wrench
Drive socket # 12
Drive socket # 32
Wheel impact socket #17
Ratchet wrench
Tap wrench
Hammer
Crow bar
Rubber mallet
Wheel chock
All the parts you need to replace – Wheel Bearing for PANDA (169) and other FIAT models
How to change Wheel Bearing on Fiat Panda 169 1.2 – step-by-step instructions for straightforward car repair
Wheel Bearing
How to change Wheel Bearing on FIAT PUNTO (188) 1.2 60 (188.030, .050, .130, .150, .230, .250) – tips for proper car maintenance
FIAT PUNTO (188) 1.2 60 (188.030, .050, .130, .150, .230, .250)
Simple DIY car repair steps – Replacing Wheel Bearing on FIAT PUNTO Van (188AX) 1.2 60
FIAT PUNTO Van (188AX) 1.2 60
Easy tricks to help you to replace Wheel Bearing on FIAT PALIO Weekend (178DX) 1.2
FIAT PALIO Weekend (178DX) 1.2
Wheel Bearing removal & installation, incredibly easy steps for FIAT PANDA (169) 1.2
FIAT PANDA (169) 1.2
Changing Wheel Bearing on FIAT Siena (178_, 172_) 1.2 – tips for first time repair
FIAT Siena (178_, 172_) 1.2
Main steps for Wheel Bearing replacement on FIAT PANDA Van (169) 1.2 4x4
FIAT PANDA Van (169) 1.2 4x4
How to change Wheel Bearing Kit on Fiat Panda 169 1.2 – step-by-step instructions for straightforward car repair
Wheel Bearing Kit
How to change Wheel Bearing Kit on FIAT PUNTO (188) 1.2 60 (188.030, .050, .130, .150, .230, .250) – tips for proper car maintenance
FIAT PUNTO (188) 1.2 60 (188.030, .050, .130, .150, .230, .250)
Simple DIY car repair steps – Replacing Wheel Bearing Kit on FIAT PUNTO Van (188AX) 1.2 60
FIAT PUNTO Van (188AX) 1.2 60
Easy tricks to help you to replace Wheel Bearing Kit on FIAT PALIO Weekend (178DX) 1.2
FIAT PALIO Weekend (178DX) 1.2
Wheel Bearing Kit removal & installation, incredibly easy steps for FIAT PANDA (169) 1.2
FIAT PANDA (169) 1.2
Changing Wheel Bearing Kit on FIAT PALIO (178BX) 1.2 – tips for first time repair
FIAT PALIO (178BX) 1.2
Main steps for Wheel Bearing Kit replacement on FIAT Siena (178_, 172_) 1.2
FIAT Siena (178_, 172_) 1.2
How to change Wheel Bearing Kit on FIAT PANDA Van (169) 1.2 4x4 – tips for proper car maintenance
FIAT PANDA Van (169) 1.2 4x4
Replacement: wheel bearing – Fiat Panda 169. AUTODOC recommends:
  • Do not re-use the bearing assembly of your Fiat Panda 169 car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – Fiat Panda 169. Recommended sequence of steps:
  1. How to change Wheel Bearing on Fiat Panda 169 2003 - free PDF and video manuals
    Step 1
    Secure the wheels with chocks.
    Step 2
    Loosen the wheel mounting bolts.Use wheel impact socket #17.
  2. How to replace FIAT PANDA (169) 1.2 2004 Wheel Bearing - step-by-step manuals and video guides
    Step 3
    Raise the rear of the car and secure on supports.
  3. Fiat Panda 169 1.1 2005 Wheel Bearing replacement: free workshop manuals
    Step 4
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Fiat Panda 169
  4. Changing Wheel Bearing on FIAT PANDA (169) 1.3 D Multijet 4x4 2006 by yourself
    Step 5
    Remove the wheel.
  5. How to remove FIAT PANDA 1.2 4x4 2007 Wheel Bearing - online easy-to-follow instructions
    Step 6
    Clean the brake drum fasteners.Use a wire brush.Use WD-40 spray.
  6. How to replace Wheel Bearing on FIAT PANDA (169) 2008: download PDF manuals and video instructions
    Step 7
    Unscrew the brake drum fastening.Use a drive socket #12.Use a ratchet wrench.
  7. How hard is it to do yourself: Wheel Bearing replacement on Fiat Panda 169 1.4 2009 - download illustrated guide
    Step 8
    Remove the brake drum.
    Replacement: wheel bearing – Fiat Panda 169. Professionals recommend:
    Examine the brake drum. Replace it if necessary.
  8. Need to know how to renew Wheel Bearing on FIAT PANDA ? This free workshop manual will help you to do it yourself
    Step 9
    Remove the wheel hub nut cap.Use a crowbar. Use a hammer.
    Replacement: wheel bearing – Fiat Panda 169. Tip from AUTODOC experts:
    In some cars, the wheel hub nut is not protected with a cap.
  9. Changing of Wheel Bearing on Fiat Panda 169 2011 won't be an issue if you follow this illustrated step-by-step guide
    Step 10
    Unscrew the hub nut.Use a drive socket #32.Use a tap wrench.
  10. FIAT PANDA 1.2 Wheel Bearing replacement: online guides and video tutorials
    Step 11
    Remove the hub and the bearing together, since they are a sealed unit.
  11. Replacing Wheel Bearing on Fiat Panda 169 2013 1.2 by yourself
    Step 12
    Clean the wheel hub mounting seat.Use a wire brush.Use all-purpose cleaning spray.Use WD-40 spray.
  12. PANDA (169) 1.2 4x4 2014 Wheel Bearing DIY replacement workshop manual
    Step 13
    Install the new wheel hub with a bearing.
  13. How to change Wheel Bearing on FIAT PANDA (169) 2015 - tips and tricks
    Step 14
    Tighten the wheel hub nut.Use a drive socket #32.Use a torque wrench.Tighten it to 188 nm torque.
    Replacement: wheel bearing – Fiat Panda 169. Tip from AUTODOC:
    The wheel bearing unit must not tilt on the axle pin.
  14. Step-by-step recommendations for DIY replacement Fiat Panda 169 2016 1.2 4x4 Wheel Bearing
    Step 15
    Install the cap of the hub nut. Use a rubber mallet.Use a crowbar.
  15. DIY replacement of Wheel Bearing on FIAT PANDA (169) 1.2 Natural Power 2017 is not an issue anymore with our step-by-step tutorial
    Step 16
    Clean the hub.Use a wire brush.
    Step 17
    Treat the wheel hub in the area where it contacts the brake drum.Use copper grease.
  16. How to change Wheel Bearing on Fiat Panda 169 2003 - free PDF and video manuals
    Step 18
    Install a brake drum.
  17. How to replace FIAT PANDA (169) 1.2 2004 Wheel Bearing - step-by-step manuals and video guides
    Step 19
    Tigten the brake drum fasteners.Use a drive socket #12.Use a torque wrench.Tighten it to 10 Nm torque.
  18. Fiat Panda 169 1.1 2005 Wheel Bearing replacement: free workshop manuals
    Step 20
    Clean the wheel rim mounting seat. Use a wire brush.
  19. Changing Wheel Bearing on FIAT PANDA (169) 1.3 D Multijet 4x4 2006 by yourself
    Step 21
    Treat the surface where the wheel rim contacts the brake drum.Use copper grease.
  20. How to remove FIAT PANDA 1.2 4x4 2007 Wheel Bearing - online easy-to-follow instructions
    Step 22
    Install the wheel.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while screwing in the fastening bolts on the car. Fiat Panda 169
  21. How to replace Wheel Bearing on FIAT PANDA (169) 2008: download PDF manuals and video instructions
    Step 23
    Screw in the wheel bolts.Use wheel impact socket #17.
  22. How hard is it to do yourself: Wheel Bearing replacement on Fiat Panda 169 1.4 2009 - download illustrated guide
    Step 24
    Lower the car and working in a cross order, tighten the wheel bolts.Use wheel impact socket #17.Use a torque wrench.Tighten it to 120 nm torque.
  23. Need to know how to renew Wheel Bearing on FIAT PANDA ? This free workshop manual will help you to do it yourself
    Step 25
    Remove the jacks and chocks.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Google Play AUTODOC Club App
App Store AUTODOC Club App
FIAT PANDA (169) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY FIAT PANDA (169) Wheel Bearing replacement - online guide
Tips & tricks for your FIAT PANDA (169)
View more
  • How to change Hub bearing on FIAT PANDA (169) 1.2 Natural Power - replacement tricks
    Reasons to check your exhaust system | How to inspect the exhaust system | AUTODOC
  • Changing Wheel bearing kit Fiat Panda 169 1.2 - Replacement Tips
    Brake discs overheating: why it happens and how to fix it | AUTODOC's tips
  • Maintenance Hacks - FIAT PANDA (169) 1.1 Wheel hub bearing replacement guide
    What if your car's hood won't open? | AUTODOC TIPS
  • Replace Axle shaft bearing on Fiat Panda 169 - free video tips
    Top 10 car parts and assemblies not recommended for DIY changement | Tips from AUTODOC