How to change air filter on Ford Mondeo BWY – replacement guide
downloads:
1
Views:
51
0
Users voted – 0
Recommended replacement interval for the part category Air filter : 3year / 60000km
Important!
This replacement procedure can be used for:
FORD MONDEO III Estate (BWY) 2.2 TDCi,
FORD MONDEO III Estate (BWY) 1.8 16V,
FORD MONDEO III Estate (BWY) 2.0 16V,
FORD MONDEO III Estate (BWY) 2.5 V6 24V,
FORD MONDEO III Estate (BWY) 2.0 16V DI / TDDi / TDCi,
FORD MONDEO III Estate (BWY) 2.0 16V TDDi / TDCi,
FORD MONDEO III Estate (BWY) 2.0 TDCi,
FORD MONDEO III Estate (BWY) ST220,
FORD MONDEO III Estate (BWY) 1.8 SCi,
FORD MONDEO III Estate (BWY) 2.2 TDCi,
FORD MONDEO III Estate (BWY) 3.0 V6 24V
…
View more
The steps may slightly vary depending on the car design.
How to change Air Filter on FORD MONDEO 3 TUTORIAL | AUTODOC
All the parts you need to replace – Air Filter for MONDEO III Estate (BWY) and other FORD models
Replacement: air filter – Ford Mondeo BWY. Professionals recommend:
Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
All work should be done with the engine stopped.
Replacement: air filter – Ford Mondeo BWY. Recommended sequence of steps:
Step 1
Open the bonnet.
Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
Step 3
Detach the air intake hose clamp. Use a flat screwdriver.
Step 4
Disconnect the air intake pipe from the air filter housing.
Step 5
Undo the fastening screws of the air filter cover. Use a Phillips screwdriver.
Step 6
Take off the filter lid.
Step 7
Remove the filter element from the filter housing.
Step 8
Clean the air filter cover and housing.
Replacement: air filter – Ford Mondeo BWY. AUTODOC recommends:
Before cleaning the air filter cover and housing, cover the air duct parts, mass airflow sensor (if available), throttle valve with a clean cloth.
Step 9
Insert a new filter element into the filter housing. Make sure that the filter edge fits tight to the housing.
AUTODOC recommends:
Replacement: air filter – Ford Mondeo BWY. Be sure to position the filtering element correctly. Avoid misalignment.Take care to only use quality filters.During installation, make sure to prevent dust and dirt from getting into the air filter housing.
Step 10
Reinstall the air filter cover. Fasten it.
Step 11
Screw in the fastening screws of the air filter cover. Use a Phillips screwdriver.
Step 12
Connect the air intake pipe to the air filter housing.
Step 13
Fasten the clamp on the air intake hose. Use clic-R collar pliers.
Step 14
Remove the fender protection cover. Close the hood.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the FORD Mondeo Mk3 Estate (BWY) model.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your FORD MONDEO III Estate (BWY)
View more
How to choose the right engine oil for your car | AUTODOC
Regain Your Confidence on the Road: Easy Headlight Restoration Tips
When, why, and how to change engine oil | AUTODOC tips
5 causes of turbocharger failure and how to avoid them | AUTODOC tips