How to change pollen filter on Ford Mondeo BWY – replacement guide
downloads:
0
Views:
36
0
Users voted – 0
Recommended replacement interval for the part category Pollen filter : 1year / 20000km
Important!
This replacement procedure can be used for:
FORD MONDEO III Estate (BWY) 2.2 TDCi,
FORD MONDEO III Estate (BWY) 1.8 16V,
FORD MONDEO III Estate (BWY) 2.0 16V,
FORD MONDEO III Estate (BWY) 2.5 V6 24V,
FORD MONDEO III Estate (BWY) 2.0 16V DI / TDDi / TDCi,
FORD MONDEO III Estate (BWY) 2.0 16V TDDi / TDCi,
FORD MONDEO III Estate (BWY) 2.0 TDCi,
FORD MONDEO III Estate (BWY) ST220,
FORD MONDEO III Estate (BWY) 1.8 SCi,
FORD MONDEO III Estate (BWY) 2.2 TDCi,
FORD MONDEO III Estate (BWY) 3.0 V6 24V
…
View more
The steps may slightly vary depending on the car design.
How to change Pollen Filter on FORD MONDEO 3 TUTORIAL | AUTODOC
All the parts you need to replace – Pollen Filter for MONDEO III Estate (BWY) and other FORD models
Replacement: pollen filter – Ford Mondeo BWY. AUTODOC experts recommend:
Replace the cabin filter at least once every six months, in early spring and autumn seasons.
Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
If the air flow into the cabin has sharply reduced, replace the filter before a scheduled maintenance.
Warning! Shut down the engine before starting any work – Ford Mondeo BWY.
Carry out replacement in the following order:
Step 1
Open the hood.
Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
Step 3
Unscrew the fastener of the wiper cowl grille located on the right side. Use Torx T30. Use a ratchet wrench.
Step 4
Raise a little the wiper cowl grille located on the right side.
Step 5
Remove the cabin filter.
Replacement: pollen filter – Ford Mondeo BWY. Professionals recommend:
Do not attempt to clean and reuse the filter - it will affect the quality of air cleaning inside the car.
Step 6
Install the cabin filter to its mounting seat.
AUTODOC recommends:
Follow the air flow direction arrow on the filter.Replacement: pollen filter – Ford Mondeo BWY. Be sure to position the filtering element correctly. Avoid misalignment.Take care to only use quality filters.
Step 7
Install and secure the wiper cowl grille located on the right side.
Step 8
Screw in the fasteners of wiper cowl grille located on the right side. Use Torx T30. Use a ratchet wrench.
Step 9
Remove the fender protection cover.
Step 10
Close the hood.
Step 11
Switch on the ignition.
Step 12
Switch on the air conditioning system. This is necessary in order to make sure that the component operates properly.
Step 13
Switch off the ignition.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the FORD Mondeo Mk3 Estate (BWY) model.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your FORD MONDEO III Estate (BWY)
View more
What to do if the airbag light is on | AUTODOC tips
How to polish an old engine valve cover to a shiny finish | AUTODOC Tips
5 mistakes made when washing the engine | AUTODOC tips
4 reasons why your CHECK ENGINE light is on | AUTODOC tips