How to change air filter on Ford Mondeo Mk3 saloon – replacement guide
downloads:
4
Views:
64
0
Users voted – 0
Recommended replacement interval for the part category Air filter : 3year / 60000km
Important!
This replacement procedure can be used for:
FORD MONDEO III Saloon (B4Y) 1.8 16V,
FORD MONDEO III Saloon (B4Y) 1.8 16V,
FORD MONDEO III Saloon (B4Y) 2.5 V6 24V,
FORD MONDEO III Saloon (B4Y) 2.0 16V DI / TDDi / TDCi,
FORD MONDEO III Saloon (B4Y) 2.0 16V TDDi / TDCi,
FORD MONDEO III Saloon (B4Y) 2.0 TDCi,
FORD MONDEO III Saloon (B4Y) ST220,
FORD MONDEO III Saloon (B4Y) 1.8 SCi,
FORD MONDEO III Saloon (B4Y) 2.2 TDCi,
FORD MONDEO III Saloon (B4Y) 3.0 V6 24V
…
View more
The steps may slightly vary depending on the car design.
How to change air filter on FORD MONDEO MK3 Saloon [TUTORIAL AUTODOC]
All the parts you need to replace – Air Filter for MONDEO III Saloon (B4Y) and other FORD models
Replacement: air filter – Ford Mondeo Mk3 saloon. AUTODOC recommends:
Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
All work should be done with the engine stopped.
Replacement: air filter – Ford Mondeo Mk3 saloon. Recommended sequence of steps:
Step 1
Open the hood.
Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
Step 3
Undo the fastening screws of the air filter cover. Use a Phillips screwdriver.
Step 4
Loosen the fastening clamp connecting the air duct to the air filter housing. Use a drive socket #7. Use a ratchet wrench.
Step 5
Detach the air duct housing from the air filter housing.
Step 6
Take off the filter lid.
AUTODOC recommends:
Replacement: air filter – Ford Mondeo Mk3 saloon. Do not use excessive force when removing the part as this may damage it.
Step 7
Cover the air intake hose with a microfibre towel to prevent dust and dirt from getting into the system.
Step 8
Remove the filter element from the filter housing.
Step 9
Clean the air filter cover and housing.
Replacement: air filter – Ford Mondeo Mk3 saloon. AUTODOC experts recommend:
Before cleaning the air filter cover and housing, cover the air duct parts, mass airflow sensor (if available), throttle valve with a clean cloth.
Step 10
Insert a new filter element into the filter housing. Make sure that the filter edge fits tight to the housing.
AUTODOC recommends:
Replacement: air filter – Ford Mondeo Mk3 saloon. Be sure to position the filtering element correctly. Avoid misalignment.Take care to only use quality filters.During installation, make sure to prevent dust and dirt from getting into the air filter housing.
Step 11
Remove the microfibre towel from the air intake hose.
Step 12
Install the air duct housing.
Step 13
Reinstall the air filter cover. Fasten it.
AUTODOC recommends:
Replacement: air filter – Ford Mondeo Mk3 saloon. To avoid damaging the part during installation, do not use excessive force.
Step 14
Screw the fastening clamp connecting the air duct to the air filter housing. Use a drive socket #7. Use a ratchet wrench.
Step 15
Screw in the fastening screws of the air filter cover. Use a Phillips screwdriver.
Step 16
Remove the fender protection cover.
Step 17
Close the hood.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the FORD Mondeo Mk3 Saloon (B4Y) model.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your FORD MONDEO III Saloon (B4Y)
View more
How to unlock your car without a key | AUTODOC tips