Disclaimer
How to change track rod end on Opel Meriva X03 – replacement guide
downloads:
7
Views:
103
Important!
This replacement procedure can be used for:
OPEL Meriva A (X03) 1.4 16V Twinport LPG (E75), OPEL Meriva A (X03) 1.8 (E75), OPEL Meriva A (X03) 1.7 DTI (E75), OPEL Meriva A (X03) 1.6 (E75), OPEL Meriva A (X03) 1.7 CDTI (E75), OPEL Meriva A (X03) 1.4 16V Twinport (E75), OPEL Meriva A (X03) 1.6 (E75), OPEL Meriva A (X03) 1.3 CDTI (E75), OPEL Meriva A (X03) 1.6 Turbo (E75), OPEL Meriva A (X03) 1.7 CDTI (E75), OPEL Meriva A (X03) 1.3 CDTI (E75) … View more
The steps may slightly vary depending on the car design.
OPEL Meriva A (X03) 1.4 16V Twinport LPG (E75), OPEL Meriva A (X03) 1.8 (E75), OPEL Meriva A (X03) 1.7 DTI (E75), OPEL Meriva A (X03) 1.6 (E75), OPEL Meriva A (X03) 1.7 CDTI (E75), OPEL Meriva A (X03) 1.4 16V Twinport (E75), OPEL Meriva A (X03) 1.6 (E75), OPEL Meriva A (X03) 1.3 CDTI (E75), OPEL Meriva A (X03) 1.6 Turbo (E75), OPEL Meriva A (X03) 1.7 CDTI (E75), OPEL Meriva A (X03) 1.3 CDTI (E75) … View more
The steps may slightly vary depending on the car design.
How to change tie rod end OPEL MERIVA A [TUTORIAL AUTODOC]

All the parts you need to replace – Track Rod End for Meriva A (X03) and other OPEL models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #21
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Tap wrench
Ball joint puller
Vernier caliper
Wheel chock
Replacement: track rod end – Opel Meriva X03. AUTODOC recommends:
- Replace tie rod ends in pairs.
- The replacement procedure is identical for the right and left tie rod ends.
- All work should be done with the engine stopped.
Replacement: track rod end – Opel Meriva X03. Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3
Raise the front of the car and secure on supports. - Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Opel Meriva X03 - Step 5
Remove the wheel. - Step 6
Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray. - Step 7
When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper. - Step 8
Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #21 (2 pieces). - Step 9
Unscrew the end fastening nut to the steering knuckle. Use a drive socket #17. Use a tap wrench. - Step 10
Disconnect the tie rod end from the steering knuckle. Use a ball joint puller. - Step 11
Screw the end out of the tie rod. - Step 12
Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray. - Step 13
Screw on a new tie rod end.Replacement: track rod end – Opel Meriva X03. Tip from AUTODOC experts:While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements. - Step 14
Connect the tie rod end to the steering knuckle.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the OPEL Meriva A (X03) model
Popular maintenance tutorials for Opel Meriva x03
Complete guides for changing the Tie rod end on different OPEL MERIVA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your OPEL Meriva A (X03)
View more
The Ultimate Guide to Engine Bay Cleaning | AUTODOC
DIY rear axle restoration | Drivetrain restoration – Part 2
Kolbenschmidt plastic gauge overview
5 tools that make car repair incredibly simple | AUTODOC tips
Most commonly replaced car parts on OPEL MERIVA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME






















