Important!

This replacement procedure can be used for:
OPEL Meriva A (X03) 1.4 16V Twinport LPG (E75), OPEL Meriva A (X03) 1.8 (E75), OPEL Meriva A (X03) 1.7 DTI (E75), OPEL Meriva A (X03) 1.6 (E75), OPEL Meriva A (X03) 1.7 CDTI (E75), OPEL Meriva A (X03) 1.4 16V Twinport (E75), OPEL Meriva A (X03) 1.6 (E75), OPEL Meriva A (X03) 1.3 CDTI (E75), OPEL Meriva A (X03) 1.6 Turbo (E75), OPEL Meriva A (X03) 1.7 CDTI (E75), OPEL Meriva A (X03) 1.3 CDTI (E75) … View more

The steps may slightly vary depending on the car design.

How to change front anti roll bar link on OPEL MERIVA A [TUTORIAL AUTODOC]

All the parts you need to replace – Anti Roll Bar Links for Meriva A (X03) and other OPEL models

Alternative products

Anti-roll bar link

Replacement: anti roll bar links – Opel Meriva X03. Tools you'll need:

                      Wire brush
                    
                      WD-40 spray
                    
                      Brake cleaner 
                    
                      Copper grease 
                    
                      Torque wrench
                    
                      Combination spanner #17
                    
                      Drive socket # 19 
                    
                      Wheel impact socket #17
                    
                      Ratchet wrench
                    
                      Wheel chock

Buy tools

Replacement: anti roll bar links – Opel Meriva X03. AUTODOC recommends:

Replace the stabiliser links on Opel Meriva X03 in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
Please note: all work on the car – Opel Meriva X03 – should be done with the engine switched off.

Carry out replacement in the following order:

Step 1

Secure the wheels with chocks.
Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 3

Raise the front of the car and secure on supports.
Step 4

Unscrew the wheel bolts.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Opel Meriva X03
Step 5

Remove the wheel.
Step 6

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 7

Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #17. Use a drive socket #19. Use a ratchet wrench.
Step 8

Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use a drive socket #19. Use a ratchet wrench.
Step 9

Remove the stabilizer rod.

Replacement: anti roll bar links – Opel Meriva X03. AUTODOC experts recommend:
Examine stabiliser bushes. Replace them if needed.
Step 10

Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 11

Install a new rod, tighten the fasteners.
Step 12

Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use a drive socket #19. Use a torque wrench. Tighten it to 55 Nm torque.
Step 13

Tighten the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #17. Use a drive socket #19. Use a torque wrench. Tighten it to 55 Nm torque.
Step 14

Treat all joints of the stabiliser link. Use copper grease.
Step 15

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 16

Clean the brake disk surface. Use a brake cleaner.

AUTODOC recommends:
Replacement: anti roll bar links – Opel Meriva X03. After applying the spray, wait a few minutes.
Step 17

Install the wheel.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while screwing in the fastening bolts on the car. Opel Meriva X03
Step 18

Screw in the wheel bolts. Use wheel impact socket #17.
Step 19

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #17. Use a torque wrench. Tighten it to 110 nm torque.
Step 20

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Need New Tyres?

Find out which tyre and wheel sizes are compatible with the OPEL Meriva A (X03) model

Opel Meriva x03 tyre size

How to change front wheel bearing on Opel Meriva X03 – replacement guide

Free download PDF
4.02 MB
How to change rear wheel bearing on Opel Meriva X03 – replacement guide

Free download PDF
2.7 MB
How to change front lower arm on Opel Meriva X03 – replacement guide

Free download PDF
1.89 MB
How to change track rod end on Opel Meriva X03 – replacement guide

Free download PDF
1.59 MB
How to change front brake pads on Opel Meriva X03 – replacement guide

Free download PDF
1.69 MB
How to change rear brake pads on Opel Meriva X03 – replacement guide

Free download PDF
1.56 MB

How to change front anti roll bar links on OPEL Meriva B (S10) – replacement guide

Free download PDF
2.07 MB
How to change anti roll bar links on a car – replacement tutorial

Universal

Free download PDF
972.8 KB
How to change front anti roll bar links on Opel Corsa C – replacement guide

Free download PDF
1.2 MB
How to change front anti roll bar links on Opel Corsa D – replacement guide

Free download PDF
1.37 MB
How to change front anti roll bar links on Opel Astra H Caravan – replacement guide

Free download PDF
1.21 MB
How to change front anti roll bar links on Opel Zafira F75 – replacement guide

Free download PDF
1.45 MB

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

5 tools that make car repair incredibly simple | AUTODOC tips

47K views

Published on: 25/01/2024
Understanding Airbag Light Warnings | Essential Tips for Car Safety

6K views

Published on: 10/04/2023
TOP 5 mistakes when replacing shock absorbers | AUTODOC tips

14K views

Published on: 15/06/2023
Stop Rust Before It Starts: Top 5 Tips for Car Body Protection | AUTODOC Insights

7K views

Published on: 27/07/2023