Important!
This replacement procedure can be used for:
HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.3 iDSi (GD1), HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.5 FF (GD3), HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.4, HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.3 iDSi (GD1), HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.5 (GD3), HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.5 EX, HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.4 LX Flex, HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.4 iDSI (GE3, GD1), HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.5 iDSi (GD3), HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.3 iDSi (GD2) View more

The steps may slightly vary depending on the car design.

How to change tie rod end / track rod end on HONDA JAZZ 1 TUTORIAL | AUTODOC

video
All the parts you need to replace – Track Rod End for Jazz II Hatchback (GD_, GE3, GE2) and other HONDA models
Tools
Replacement: track rod end – Honda Jazz GD. Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
High-temperature ceramic grease
Torque wrench
Combination spanner #19
Drive socket # 17
Wheel impact socket #19
Ratchet wrench
Nippers
Crow bar
Ball joint puller
Vernier caliper
Wheel chock
Replacement: track rod end – Honda Jazz GD. AUTODOC experts recommend:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • Please note: all work on the car – Honda Jazz GD – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Track Rod End on Honda Jazz GD 2001 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.3 iDSi (GD1) 2002 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel mounting bolts.Use wheel impact socket #19.
  3. Step 3
    Honda Jazz GD 1.2 i-DSI (GD5, GE2) 2003 Track Rod End replacement: free workshop manuals
    Raise the front of the car and secure on supports.
  4. Step 4
    Changing Track Rod End on HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.4 2004 by yourself
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Honda Jazz GD
  5. Step 5
    How to remove HONDA JAZZ 1.4 LX Flex 2005 Track Rod End - online easy-to-follow instructions
    Remove the wheel.
  6. Step 6
    How to replace Track Rod End on HONDA Jazz II Hatchback (GD_, GE3, GE2) 2006: download PDF manuals and video instructions
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward.Use a vernier caliper.
  7. Step 7
    How hard is it to do yourself: Track Rod End replacement on Honda Jazz GD 1.5 EX 2007 - download illustrated guide
    Remove the cotter pin.Use nippers.
  8. Step 8
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush.Use WD-40 spray.
    Step 9
    Need to know how to renew Track Rod End on HONDA JAZZ 2008? This free workshop manual will help you to do it yourself
    Unscrew the end fastening nut to the steering knuckle.Use a drive socket #17.Use a ratchet wrench.
  9. Step 10
    Changing of Track Rod End on Honda Jazz GD 2001 won't be an issue if you follow this illustrated step-by-step guide
    Disconnect the tie rod end from the steering knuckle.Use a ball joint puller.
  10. Step 11
    Clean the lock nut that connects the tie rod to the tie rod end.Use a wire brush.Use WD-40 spray.
    Step 12
    HONDA JAZZ 1.5 iDSi (GD3) Track Rod End replacement: online guides and video tutorials
    Loosen the lock nut securing the tie rod end to the tie rod.Use a combination spanner #19.
  11. Step 13
    Replacing Track Rod End on Honda Jazz GD 2003 1.3 iDSi (GD1) by yourself
    Screw the end out of the tie rod.
  12. Step 14
    Jazz II Hatchback (GD_, GE3, GE2) 1.4 LX Flex 2004 Track Rod End DIY replacement workshop manual
    Clean the mounting seats of the tie rod end.Use a wire brush.Use WD-40 spray.
  13. Step 15
    How to change Track Rod End on HONDA Jazz II Hatchback (GD_, GE3, GE2) 2005 - tips and tricks
    Screw on a new tie rod end.
    Replacement: track rod end – Honda Jazz GD. Tip from AUTODOC experts:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the HONDA Jazz Hatchback (GD, GE3, GE2) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
HONDA Jazz II Hatchback (GD_, GE3, GE2) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
Autodoc CLUB App icon
DIY HONDA Jazz II Hatchback (GD_, GE3, GE2) Track Rod End replacement - online guide
Tips & tricks for your HONDA Jazz II Hatchback (GD_, GE3, GE2)
View more
  • How to change Tie rod end on HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.4 iDSI (GE3, GD1) - replacement tricks
    TOP 6 WD-40 lifehacks | AUTODOC tips
  • Changing Outer tie rod Honda Jazz GD 1.3 iDSi (GD1) - Replacement Tips
    8 bad driving habits | AUTODOC tips
  • Maintenance Hacks - HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.2 i-DSI (GD5, GE2) Track rod end ball joint replacement guide
    Top 5 reasons why your car squeals | AUTODOC Tips
  • Replace Outer tie rod end on Honda Jazz GD - free video tips
    Coolant comparison test | AUTODOC