How to carry out replacement: Wheel Bearing 1.3 iDSi (GD1) Honda Jazz GD
Disclaimer
Change Honda Jazz GD 1.5 iDSi (GD3) Wheel Bearing yourself – manuals and video tutorials

How to change rear wheel bearing on Honda Jazz GD – replacement guide

downloads: 24
Views: 384
Download your free tutorial and fix HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.5 FF (GD3) problems yourself Download for free 1.84 MB Wheel Bearing for Honda Jazz GD Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.3 iDSi (GD1), HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.3 iDSi (GD1), HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.5 (GD3), HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.3 iDSi (GD2) … View more

The steps may slightly vary depending on the car design.

How to change a Rear wheel bearing on HONDA JAZZ 1 TUTORIAL | AUTODOC

video
Published on: 26/07/2018
68K views
All the parts you need to replace – Wheel Bearing for Jazz II Hatchback (GD_, GE3, GE2) and other HONDA models
Alternative products
How to change Wheel bearing kit on Honda Jazz GD 1.3 iDSi (GD1) – step-by-step instructions for straightforward car repair Wheel bearing kit
Tools
Replacement: wheel bearing – Honda Jazz GD. Tools you'll need:
Wire brush
Nylon cleaning brush
WD-40 spray
Brake cleaner
All-purpose cleaning spray
High-temperature ceramic grease
Torque wrench
Drive socket # 12
Drive socket # 14
Drive socket # 30
Wheel impact socket #19
Ratchet wrench
Hammer
Flat chisel
Crow bar
Rubber mallet
Phillips screwdriver
Brake caliper wind back tool
Wheel chock
Buy tools
AUTODOC recommends:
  • Do not re-use the bearing assembly of your Honda Jazz GD car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • Please note: all work on the car – Honda Jazz GD – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Wheel Bearing on Honda Jazz GD 2001 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.3 iDSi (GD1) 2002 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Honda Jazz GD 1.2 i-DSI (GD5, GE2) 2003 Wheel Bearing replacement: free workshop manuals
    Raise the rear of the car and secure on supports.
  4. Step 4
    Changing Wheel Bearing on HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.4 2004 by yourself
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Honda Jazz GD
  5. Step 5
    How to remove HONDA JAZZ 1.4 LX Flex 2005 Wheel Bearing - online easy-to-follow instructions
    Remove the wheel.
  6. Step 6
    Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
    Step 7
    How to replace Wheel Bearing on HONDA Jazz II Hatchback (GD_, GE3, GE2) 2006: download PDF manuals and video instructions
    Unscrew the brake caliper fastening. Use a drive socket #12. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Wheel Bearing replacement on Honda Jazz GD 1.5 EX 2007 - download illustrated guide
    Remove the brake caliper. Use a crowbar.
    Replacement: wheel bearing – Honda Jazz GD. Professionals recommend:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
  8. Step 9
    Need to know how to renew Wheel Bearing on HONDA JAZZ 2008? This free workshop manual will help you to do it yourself
    Remove the brake pads. Use a crowbar.
  9. Step 10
    Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray.
    Step 11
    Changing of Wheel Bearing on Honda Jazz GD 2001 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the caliper bracket fastening. Use a drive socket #14. Use a ratchet wrench.
  10. Step 12
    Remove the fastening bolts.
    Step 13
    HONDA JAZZ 1.5 iDSi (GD3) Wheel Bearing replacement: online guides and video tutorials
    Remove the caliper bracket.
  11. Step 14
    Clean the brake disc fasteners. Use a wire brush. Use WD-40 spray.
    Step 15
    Replacing Wheel Bearing on Honda Jazz GD 2003 1.3 iDSi (GD1) by yourself
    Unscrew the brake disc fastening. Use a Phillips screwdriver.
  12. Step 16
    Jazz II Hatchback (GD_, GE3, GE2) 1.4 LX Flex 2004 Wheel Bearing DIY replacement workshop manual
    Remove the brake disc.
  13. Step 17
    How to change Wheel Bearing on HONDA Jazz II Hatchback (GD_, GE3, GE2) 2005 - tips and tricks
    Remove the hub bearing protection cap. Use a crowbar. Use a rubber mallet.
  14. Step 18
    Step-by-step recommendations for DIY replacement Honda Jazz GD 2006 1.4 LX Flex Wheel Bearing
    Unstake the wheel hub retaining nut. Use a flat metal-working chisel. Use a hammer.
  15. Step 19
    DIY replacement of Wheel Bearing on HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.4 iDSI (GE3, GD1) 2007 is not an issue anymore with our step-by-step tutorial
    Unscrew the wheel hub axle nut. Use a drive socket #30. Use a ratchet wrench.
  16. Step 20
    How to change Wheel Bearing on Honda Jazz GD 2001 - free PDF and video manuals
    Remove the hub and the bearing together, since they are a sealed unit.
  17. Step 21
    Clean the wheel hub mounting seat. Use all-purpose cleaning spray.
    Step 22
    How to replace HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.3 iDSi (GD1) 2002 Wheel Bearing - step-by-step manuals and video guides
    Install the new wheel hub together with the bearing.
  18. Step 23
    Install the fastening nut.
    Step 24
    Honda Jazz GD 1.2 i-DSI (GD5, GE2) 2003 Wheel Bearing replacement: free workshop manuals
    Tighten the hub. Use a drive socket #30. Use a torque wrench. Tighten it to 162 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the HONDA Jazz Hatchback (GD, GE3, GE2) model

Honda Jazz GD tyre size

Popular maintenance tutorials for Honda Jazz GD

More manuals for Honda Jazz GD

Complete guides for changing the Wheel bearings on different HONDA JAZZ models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY HONDA Jazz II Hatchback (GD_, GE3, GE2) Wheel Bearing replacement - online guide
Tips & tricks for your HONDA Jazz II Hatchback (GD_, GE3, GE2)
View more
  • How to change Wheel bearings on HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.4 iDSI (GE3, GD1) - replacement tricks
    Top 5 reasons why your car squeals | AUTODOC Tips
    10K views
    Published on: 26/10/2023
  • Changing Hub bearing Honda Jazz GD 1.3 iDSi (GD1) - Replacement Tips
    How to remove scratches from car plastic | AUTODOC tips
    188K views
    Published on: 15/12/2022
  • Maintenance Hacks - HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.2 i-DSI (GD5, GE2) Wheel bearing kit replacement guide
    The Fast and Easy Way to Fix a Broken Wheel Stud | AUTODOC tips
    9K views
    Published on: 08/12/2020
  • Replace Wheel hub bearing on Honda Jazz GD - free video tips
    Deep interior cleaning | Car transformation by detailing
    7K views
    Published on: 05/09/2024

Most commonly replaced car parts on HONDA JAZZ

Professional manuals for the most common HONDA models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
HONDA Jazz II Hatchback (GD_, GE3, GE2) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME