Important!
This replacement procedure can be used for:
HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.3 iDSi (GD1), HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.5 (GD3) View more

The steps may slightly vary depending on the car design.

How to change Strut Mount on HONDA JAZZ 1 TUTORIAL | AUTODOC

video
All the parts you need to replace – Strut Mount for Jazz II Hatchback (GD_, GE3, GE2) and other HONDA models
How to change Top strut mount on Honda Jazz GD 1.3 iDSi (GD1) – step-by-step instructions for straightforward car repair Top strut mount
How to change Repair kit, suspension strut on Honda Jazz GD 1.3 iDSi (GD1) – step-by-step instructions for straightforward car repair Repair kit, suspension strut
How to change Anti-Friction Bearing, suspension strut support mounting on Honda Jazz GD 1.3 iDSi (GD1) – step-by-step instructions for straightforward car repair Anti-Friction Bearing, suspension strut support mounting
How to change Suspension Strut Mounting on Honda Jazz GD 1.3 iDSi (GD1) – step-by-step instructions for straightforward car repair Suspension Strut Mounting
Tools
Replacement: strut mount – Honda Jazz GD. List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
High-temperature ceramic grease
HEX bit No.H5.
HEX bit No.H7.
Drive socket # 12
Drive socket # 17
Combination spanner #17
Wheel impact socket #19
Ratchet wrench
Torque wrench
Flat Screwdriver
Fender cover
Wheel chock
Replacement: strut mount – Honda Jazz GD. AUTODOC experts recommend:
  • The replacement procedure is identical for the mounts of the left and right shock struts of the front suspension.
  • All mounts of the front shock struts should be replaced simultaneously.
  • Warning! Shut down the engine before starting any work – Honda Jazz GD.
Carry out replacement in the following order:
  1. Step 1
    How to change Strut Mount on Honda Jazz GD 2001 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.3 iDSi (GD1) 2002 Strut Mount - step-by-step manuals and video guides
    Loosen the wheel mounting bolts.Use wheel impact socket #19.
  3. Step 3
    Honda Jazz GD 1.2 i-DSI (GD5, GE2) 2003 Strut Mount replacement: free workshop manuals
    Raise the front of the car and secure on supports.
  4. Step 4
    Changing Strut Mount on HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.4 2004 by yourself
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. Honda Jazz GD
  5. Step 5
    How to remove HONDA JAZZ 1.4 LX Flex 2005 Strut Mount - online easy-to-follow instructions
    Remove the wheel.
  6. Step 6
    Clean the stabiliser link fasteners.Use a wire brush.Use WD-40 spray.
    Step 7
    How to replace Strut Mount on HONDA Jazz II Hatchback (GD_, GE3, GE2) 2006: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the shock strut.Use a combination spanner #17.Use HEX No.H5.Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Strut Mount replacement on Honda Jazz GD 1.5 EX 2007 - download illustrated guide
    Remove the stabilizer rod.
  8. Step 9
    Need to know how to renew Strut Mount on HONDA JAZZ 2008? This free workshop manual will help you to do it yourself
    Disconnect the brake hose holder from the shock absorber strut.Use a drive socket #12.Use a ratchet wrench.
  9. Step 10
    Changing of Strut Mount on Honda Jazz GD 2001 won't be an issue if you follow this illustrated step-by-step guide
    Detach the brake hose from the shock strut.
  10. Step 11
    HONDA JAZZ 1.5 iDSi (GD3) Strut Mount replacement: online guides and video tutorials
    Disconnect the ABS sensor wiring.Use a flat screwdriver.
  11. Step 12
    Replacing Strut Mount on Honda Jazz GD 2003 1.3 iDSi (GD1) by yourself
    Clean the fasteners connecting the shock strut to the steering knuckle.Use a wire brush.Use WD-40 spray.
  12. Step 13
    Jazz II Hatchback (GD_, GE3, GE2) 1.4 LX Flex 2004 Strut Mount DIY replacement workshop manual
    Unscrew the fasteners connecting the suspension strut to the steering knuckle.Use a combination spanner #17.Use a drive socket #17.Use a ratchet wrench.
  13. Step 14
    Remove the fastening bolts.
    Step 15
    How to change Strut Mount on HONDA Jazz II Hatchback (GD_, GE3, GE2) 2005 - tips and tricks
    Disconnect the steering knuckle from the shock absorber strut.
  14. Step 16
    Step-by-step recommendations for DIY replacement Honda Jazz GD 2006 1.4 LX Flex Strut Mount
    Lower the car.
  15. Step 17
    DIY replacement of Strut Mount on HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.4 iDSI (GE3, GD1) 2007 is not an issue anymore with our step-by-step tutorial
    Open the bonnet.
  16. Step 18
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 19
    How to change Strut Mount on Honda Jazz GD 2001 - free PDF and video manuals
    Unscrew the top fastening of the shock strut mount.Use a combination spanner #17.Use HEX No.H7.Use a ratchet wrench.
  17. Step 20
    How to replace HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.3 iDSi (GD1) 2002 Strut Mount - step-by-step manuals and video guides
    Remove the suspension strut.
  18. Step 21
    Honda Jazz GD 1.2 i-DSI (GD5, GE2) 2003 Strut Mount replacement: free workshop manuals
    Remove the top strut mount.
    AUTODOC recommends:
    Examine the shock absorber dust cap and the bump stop. Replace them if necessary.
  19. Step 22
    Clean the mounting seat of the shock strut mount.Use a wire brush.Use WD-40 spray.
    Step 23
    Changing Strut Mount on HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.4 2004 by yourself
    Install a new top shock strut mount.
  20. Step 24
    How to remove HONDA JAZZ 1.4 LX Flex 2005 Strut Mount - online easy-to-follow instructions
    Install the shock strut into the wheel arch.
  21. Step 25
    How to replace Strut Mount on HONDA Jazz II Hatchback (GD_, GE3, GE2) 2006: download PDF manuals and video instructions
    Tighten the upper fastener of the shock absorber strut mount.Use a combination spanner #17.Use HEX No.H7.Use a torque wrench.Tighten it to 44 nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
HONDA Jazz II Hatchback (GD_, GE3, GE2) Strut Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY HONDA Jazz II Hatchback (GD_, GE3, GE2) Strut Mount replacement - online guide
Tips & tricks for your HONDA Jazz II Hatchback (GD_, GE3, GE2)
View more
  • How to change Strut mount on HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.4 iDSI (GE3, GD1) - replacement tricks
    How to swap the engine on a BMW E30 Turbo | SUPERCAR AUTODOC
  • Changing Top mount Honda Jazz GD 1.3 iDSi (GD1) - Replacement Tips
    How to remove scratches from a car | AUTODOC tips
  • Maintenance Hacks - HONDA Jazz II Hatchback (GD_, GE3, GE2) 1.2 i-DSI (GD5, GE2) Top strut mount replacement guide
    5 tools that make car repair incredibly simple | AUTODOC tips
  • Replace Top mounts on Honda Jazz GD - free video tips
    How to repair a bumper yourself | AUTODOC tips