How to carry out replacement: Track Rod End 1.3 i-V TEC City GM
Disclaimer
Change City GM 1.3 i-V TEC Track Rod End yourself – manuals and video tutorials

How to change track rod end on HONDA City Saloon (GM2, GM3) – replacement guide

downloads: 4
Views: 41
Download your free tutorial and fix HONDA CITY Saloon (GM) 1.5 Flex problems yourself Download for free 1.64 MB Track Rod End for City GM Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
HONDA CITY Saloon (GM) 1.3 i-V TEC … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for CITY Saloon (GM) and other HONDA models
How to change Track rod end on City GM 1.3 i-V TEC – step-by-step instructions for straightforward car repair Track rod end
How to change Track rod end on City Saloon (GM2, GM3) – tips for proper car maintenance
Track rod end for City Saloon (GM2, GM3) Petrol (99 hp)
Tools
Replacement: track rod end – HONDA CITY Saloon (GM). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #19
Drive socket # 17
Wheel impact socket #19
Ratchet wrench
Torque wrench
Round-nose pliers
Vernier caliper
Tap wrench
Ball joint puller
Crow bar
Wheel chock
Buy tools
Replacement: track rod end – HONDA CITY Saloon (GM). AUTODOC recommends:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • All work should be done with the engine stopped.
Replacement: track rod end – HONDA CITY Saloon (GM). Recommended sequence of steps:
  1. Step 1
    How to change Track Rod End on City GM 2008 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace HONDA CITY Saloon (GM) 1.3 i-V TEC 2009 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    City GM 1.5 i-VTEC 2010 Track Rod End replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: track rod end – HONDA CITY Saloon (GM). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Track Rod End on HONDA CITY Saloon (GM) 1.5 Flex 2011 by yourself
    Remove the wheel.
  5. Step 6
    How to remove HONDA CITY 1.3 i-V TEC 2012 Track Rod End - online easy-to-follow instructions
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Track Rod End on HONDA CITY Saloon (GM) 2013: download PDF manuals and video instructions
    Remove the cotter pin fixing the tie rod end fastening. Use a crowbar. Use round-nose pliers.
  7. Step 8
    How hard is it to do yourself: Track Rod End replacement on City GM 1.5 i-VTEC (GM2) 2014 - download illustrated guide
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #17. Use a tap wrench.
  8. Step 9
    Need to know how to renew Track Rod End on HONDA CITY 2015? This free workshop manual will help you to do it yourself
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  9. Step 10
    Changing of Track Rod End on City GM 2016 won't be an issue if you follow this illustrated step-by-step guide
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  10. Step 11
    HONDA CITY 1.3 i-V TEC Track Rod End replacement: online guides and video tutorials
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #19.
  11. Step 12
    Replacing Track Rod End on City GM 2018 1.3 i-V TEC by yourself
    Screw the end out of the tie rod.
  12. Step 13
    CITY Saloon (GM) 1.3 i-V TEC 2019 Track Rod End DIY replacement workshop manual
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  13. Step 14
    How to change Track Rod End on HONDA CITY Saloon (GM) 2020 - tips and tricks
    Screw on a new tie rod end.
    Replacement: track rod end – HONDA CITY Saloon (GM). AUTODOC experts recommend:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
  14. Step 15
    Step-by-step recommendations for DIY replacement City GM 2021 1.3 i-V TEC Track Rod End
    Connect the tie rod end to the steering knuckle.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the HONDA City Saloon (GM2, GM3) model.

Browse tyres

Popular maintenance tutorials for City GM

More manuals for City GM

Complete guides for changing the Tie rod end on different HONDA CITY models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
HONDA CITY Saloon (GM) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY HONDA CITY Saloon (GM) Track Rod End replacement - online guide
Tips & tricks for your HONDA CITY Saloon (GM)
View more
  • How to change Tie rod end on HONDA CITY Saloon (GM) 1.5 i-VTEC (GM2) - replacement tricks
    5 car interior cleaning mistakes | AUTODOC tips
    6K views
    Published on: 26/05/2022
  • Changing Outer tie rod City GM 1.3 i-V TEC - Replacement Tips
    What causes engine misfire? | AUTODOC
    5K views
    Published on: 10/07/2020
  • Maintenance Hacks - HONDA CITY Saloon (GM) 1.5 i-VTEC Track rod end ball joint replacement guide
    What to do if the belt squeals | AUTODOC tips
    4K views
    Published on: 04/03/2021
  • Replace Outer tie rod end on City GM - free video tips
    Coolant comparison test | AUTODOC
    11K views
    Published on: 18/02/2021

Most commonly replaced car parts on HONDA CITY

Professional manuals for the most common HONDA models