When to replace the Poly V-Belt on your FORD Tourneo Custom
Recommended replacement interval for the part category V-Ribbed Belt Set : 10 year / 250000 km
Important!
This replacement procedure can be used for:
FORD Tourneo Custom V362 Minibus (F3) 2.2 TDCi, FORD Tourneo Custom V362 Minibus (F3) 2.2 TDCi, FORD Tourneo Custom V362 Minibus (F3) 2.2 TDCi View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for Tourneo Custom V362 Minibus (F3) and other FORD models
Alternative products
How to change V-Ribbed Belt Set on Ford Tourneo Custom Minibus 2.2 TDCi – step-by-step instructions for straightforward car repair V-Ribbed Belt Set
Tools
Replacement: serpentine belt – FORD TOURNEO CUSTOM Bus. List of the tools you'll need:
15 mm combination spanner
Mounting lever
Stretch belt removal/fitting tool
Replacement: serpentine belt – FORD TOURNEO CUSTOM Bus. AUTODOC experts recommend:
  • All the work should be carried out with the ignition switched off.
Replacement: serpentine belt – FORD TOURNEO CUSTOM Bus. Take the following steps:
  1. Step 1
    Lift the vehicle using a vehicle lift or place it over an inspection pit.
    Step 2
    How to change Poly V-Belt on Ford Tourneo Custom Minibus 2012 - free PDF and video manuals
    Remove the V-ribbed belt of the power steering pump by turning the crankshaft pulley. Use a stretch belt removal/fitting tool. Use a mounting lever. Use a 15 mm combination spanner.
  2. Step 3
    How to replace FORD Tourneo Custom V362 Minibus (F3) 2.2 TDCi 2013 Poly V-Belt - step-by-step manuals and video guides
    Remove the alternator V-ribbed belt by turning the crankshaft pulley. Use a stretch belt removal/fitting tool. Use a mounting lever. Use a 15 mm combination spanner.
  3. Step 4
    Ford Tourneo Custom Minibus 2.0 EcoBlue 2014 Poly V-Belt replacement: free workshop manuals
    Check the condition of the alternator and power steering pump pulleys. Replace if necessary.
  4. Step 5
    Changing Poly V-Belt on FORD Tourneo Custom V362 Minibus (F3) 1.0 EcoBoost PHEV 2015 by yourself
    Fit a new alternator V-ribbed belt by turning the crankshaft pulley. Use a stretch belt removal/fitting tool. Use a 15 mm combination spanner.
    Replacement: serpentine belt – FORD TOURNEO CUSTOM Bus. Tip:
    Be careful not to damage the V-ribbed belt when installing it.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the FORD Tourneo Custom V362 Minibus (F3) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY FORD Tourneo Custom V362 Minibus (F3) Poly V-Belt replacement - online guide
Tips & tricks for your FORD Tourneo Custom V362 Minibus (F3)
View more
  • How to change Alternator belt on FORD Tourneo Custom V362 Minibus (F3) 2.0 EcoBlue mHEV - replacement tricks
    Revive Your Vehicle's Look | How to Restore Wheel Rims Yourself!
  • Changing Auxiliary belt Ford Tourneo Custom Minibus 2.2 TDCi - Replacement Tips
    5 most common causes of oil leaks | AUTODOC tips
  • Maintenance Hacks - FORD Tourneo Custom V362 Minibus (F3) 2.0 EcoBlue Poly V-belt replacement guide
    Top 5 Car Interior Cleaning Mistakes You Should Avoid | AUTODOC Tips
  • Replace Drive belt on Ford Tourneo Custom Minibus - free video tips
    TOP 6 WD-40 lifehacks | AUTODOC tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
FORD Tourneo Custom V362 Minibus (F3) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME