Disclaimer
How to change serpentine belt on Ford Fiesta JA8 – replacement guide
downloads:
21
Views:
707
Recommended replacement interval for the part category Serpentine belt : 10 year / 140000 km
Important!
This replacement procedure can be used for:
FORD Fiesta Mk6 Hatchback (JA8, JR8) 1.4 TDCi, FORD Fiesta Mk6 Hatchback (JA8, JR8) 1.6 TDCi, FORD Fiesta Mk6 Hatchback (JA8, JR8) 1.4 TDCi, FORD Fiesta Mk6 Hatchback (JA8, JR8) 1.6 TDCi, FORD Fiesta Mk6 Hatchback (JA8, JR8) 1.6 TDCi, FORD Fiesta Mk6 Hatchback (JA8, JR8) 1.5 TDCi, FORD Fiesta Mk6 Hatchback (JA8, JR8) 1.5 TDCi … View more
The steps may slightly vary depending on the car design.
FORD Fiesta Mk6 Hatchback (JA8, JR8) 1.4 TDCi, FORD Fiesta Mk6 Hatchback (JA8, JR8) 1.6 TDCi, FORD Fiesta Mk6 Hatchback (JA8, JR8) 1.4 TDCi, FORD Fiesta Mk6 Hatchback (JA8, JR8) 1.6 TDCi, FORD Fiesta Mk6 Hatchback (JA8, JR8) 1.6 TDCi, FORD Fiesta Mk6 Hatchback (JA8, JR8) 1.5 TDCi, FORD Fiesta Mk6 Hatchback (JA8, JR8) 1.5 TDCi … View more
The steps may slightly vary depending on the car design.
How to change serpentine belt / v-ribbed belt on FORD FIESTA JA8 [TUTORIAL AUTODOC]

All the parts you need to replace – Poly V-Belt for Fiesta Mk6 Hatchback (JA8, JR8) and other FORD models
Alternative products

Combination spanner #15
Torx bit T30
Ratchet wrench
Fender cover
Replacement: serpentine belt – Ford Fiesta JA8. AUTODOC recommends:
- All work should be done with the engine stopped.
Replacement: serpentine belt – Ford Fiesta JA8. Use the following procedure:
- Step 1
Open the bonnet. - Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car. - Step 3
Lift the car using a jack or place it over an inspection pit. - Step 4
Undo the fasteners of the oil pan lower cover. Use Torx T30. Use a ratchet wrench. - Step 5
Remove the oil pan cover. - Step 6
Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #15. - Step 7
Remove the V-ribbed belt. - Step 8Return the tensioner pulley to its initial position.Replacement: serpentine belt – Ford Fiesta JA8. Professionals recommend:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.Step 9
Install the V-ribbed belt.Replacement: serpentine belt – Ford Fiesta JA8. AUTODOC experts recommend:Make sure that the V-ribbed belt fits all pulleys snugly. - Step 10Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #15.Step 11
Place the V-ribbed belt on the tensioner pulley.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD Fiesta Mk6 Hatchback (JA8, JR8) model
Popular maintenance tutorials for Ford Fiesta Mk6
Complete guides for changing the Alternator belt on different FORD FIESTA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD Fiesta Mk6 Hatchback (JA8, JR8)
View more
Top 4 Car Cleaning Products to Protect Your Car's Body | AUTODOC Tips
Why Is the Windscreen Washer Not Spraying? Solution
Don’t Replace, Just Polish! Headlight Restoration with AUTODOC
Discover the 4 Key Reasons Your CHECK ENGINE Light Could Be On | AUTODOC Tips
Most commonly replaced car parts on FORD FIESTA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




















