How to change the serpentine belt on the Ford Transit Mk7 van – replacement guide
downloads:
5
Views:
342
0
Users voted – 0
Recommended replacement interval for the part category V-Ribbed Belt Set : 10year / 250000km
Important!
This replacement procedure can be used for:
FORD TRANSIT MK-7 Box 2.2 TDCi,
FORD TRANSIT MK-7 Box 2.2 TDCi,
FORD TRANSIT MK-7 Box 2.2 TDCi,
FORD TRANSIT MK-7 Box 2.2 TDCi,
FORD TRANSIT MK-7 Box 2.2 TDCi,
FORD TRANSIT MK-7 Box 2.2 TDCi,
FORD TRANSIT MK-7 Box 2.2 TDCi
…
View more
The steps may slightly vary depending on the car design.
How to change the serpentine belt on the FORD TRANSIT MK7 [AUTODOC TUTORIAL]
All the parts you need to replace – Poly V-Belt for TRANSIT MK-7 Box and other FORD models
Replacement: serpentine belt – Ford Transit Mk7 van. AUTODOC experts recommend:
All the work should be carried out with the ignition switched off.
Replacement: serpentine belt – Ford Transit Mk7 van. Take the following steps:
Step 1
Lift the vehicle using a vehicle lift or place it over an inspection pit.
Step 2
Remove the V-ribbed belt of the power steering pump by turning the crankshaft pulley. Use a stretch belt removal/fitting tool. Use a mounting lever. Use a 15 mm combination spanner.
Step 3
Remove the alternator V-ribbed belt by turning the crankshaft pulley. Use a stretch belt removal/fitting tool. Use a mounting lever. Use a 15 mm combination spanner.
Step 4
Check the condition of the alternator and power steering pump pulleys. Replace if necessary.
Step 5
Fit a new alternator V-ribbed belt by turning the crankshaft pulley. Use a stretch belt removal/fitting tool. Use a 15 mm combination spanner.
Replacement: serpentine belt – Ford Transit Mk7 van. Tip:
Be careful not to damage the V-ribbed belt when installing it.
Step 6
Fit the V-ribbed belt of the power steering pump by turning the crankshaft pulley. Use a stretch belt removal/fitting tool. Use a 15 mm combination spanner.
Caution!
Be careful not to damage the V-ribbed belt when installing it.
Step 7
Lower the vehicle.
Step 8
Run the engine for a few minutes.
Replacement: serpentine belt – Ford Transit Mk7 van. AUTODOC recommends:
This is necessary to ensure that the component works properly.
Step 9
Switch off the engine.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the FORD Transit Mk6 Van (V347, V348) model.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your FORD TRANSIT MK-7 Box
View more
5 mistakes made when washing the engine | AUTODOC tips
Replacing your engine cooling fan | AUTODOC tips
How to find and change a fuse | AUTODOC
How to replace the suspension on a BMW E30 Turbo | SUPERCAR AUTODOC