Disclaimer
How to change tailgate struts on Toyota Yaris P1 – replacement guide
downloads:
9
Views:
320
Important!
This replacement procedure can be used for:
TOYOTA Yaris Hatchback (_P1_) 1.0 (SCP10_), TOYOTA Yaris Hatchback (_P1_) 1.5 (NCP13_), TOYOTA Yaris Hatchback (_P1_) 1.4 D-4D (NLP10_), TOYOTA Yaris Hatchback (_P1_) 1.3 (SCP12_, SCP13_), TOYOTA Yaris Hatchback (_P1_) 1.0 (SCP10_), TOYOTA Yaris Hatchback (_P1_) 1.5 (NCP13_) … View more
The steps may slightly vary depending on the car design.
TOYOTA Yaris Hatchback (_P1_) 1.0 (SCP10_), TOYOTA Yaris Hatchback (_P1_) 1.5 (NCP13_), TOYOTA Yaris Hatchback (_P1_) 1.4 D-4D (NLP10_), TOYOTA Yaris Hatchback (_P1_) 1.3 (SCP12_, SCP13_), TOYOTA Yaris Hatchback (_P1_) 1.0 (SCP10_), TOYOTA Yaris Hatchback (_P1_) 1.5 (NCP13_) … View more
The steps may slightly vary depending on the car design.
How to change gas struts on TOYOTA YARIS P1 [TUTORIAL AUTODOC]

All the parts you need to replace – Tailgate Struts for Yaris Hatchback (_P1_) and other TOYOTA models
Alternative products

Nylon cleaning brush
WD-40 spray
Torque wrench
Drive socket # 10
Ratchet wrench
Hydraulic transmission jack
Replacement: tailgate struts – Toyota Yaris P1. AUTODOC recommends:
- Right and left gas struts of the boot lid should be replaced simultaneously.
- The replacement procedure is identical for the right and left gas struts of the boot lid.
- Please note: all work on the car – Toyota Yaris P1 – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1
Open the boot lid. - Step 2
Support the boot lid. Use a hydraulic transmission jack. - Step 3
Unscrew the fastener connecting the boot lid gas strut to the body. Use a drive socket #10. Use a ratchet wrench. - Step 4
Unscrew the fastener connecting the gas strut to the boot lid. Use a drive socket #10. Use a ratchet wrench.Replacement: tailgate struts – Toyota Yaris P1. Tip:To avoid any injuries, be sure to hold the boot lid while demounting the gas struts. - Step 5
Remove the boot lid gas strut. - Step 6
Clean the mounting seats of the boot strut. Use a nylon cleaning brush. Use WD-40 spray. - Step 7
Install the new boot lid gas strut.Replacement: tailgate struts – Toyota Yaris P1. Tip from AUTODOC experts:To avoid any injuries, be sure to hold the boot lid while installing the gas strut.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA Yaris I Hatchback (P1) model
Popular maintenance tutorials for Toyota Yaris Mk1
Complete guides for changing the Tailgate struts on different TOYOTA YARIS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your TOYOTA Yaris Hatchback (_P1_)
View more
How to make an injector test bench yourself
Top 5 reasons why the suspension knocks | AUTODOC tips
How to inspect and troubleshoot your car heater when it’s not working
How to Use Sandblasting Equipment: Step-by-Step Guide | AUTODOC Tips
Most commonly replaced car parts on TOYOTA YARIS
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



















