
Disclaimer
How to change spark plugs on TOYOTA PRIUS PLUS (ZVW4_) – replacement guide
downloads:
8
Views:
284

Recommended replacement interval for the part category Spark plug : 90000 km
Important!
This replacement procedure can be used for:
TOYOTA PRIUS PLUS (ZVW4_) 1.8 Hybrid (ZVW40W, ZVW41W) … View more
The steps may slightly vary depending on the car design.
TOYOTA PRIUS PLUS (ZVW4_) 1.8 Hybrid (ZVW40W, ZVW41W) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for PRIUS PLUS (ZVW4_) and other TOYOTA models
Spark plug
Alternative products

Electronic spray
High-temperature anti-seize lubricant
Drive socket # 10
Spark plug socket # 16
Ratchet wrench
Torque wrench
Fender cover
Replacement: spark plugs – TOYOTA PRIUS PLUS (ZVW4_). Professionals recommend:
- The replacement procedure is the same for all spark plugs.
- Please note: all work on the car – TOYOTA PRIUS PLUS (ZVW4_) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Remove the engine cover.
- Step 4Unplug the connectors from the ignition coils.
- Step 5Clean the ignition coils.
- Step 6Unscrew the fasteners of the ignition coils. Use a drive socket #10. Use a ratchet wrench.
- Step 7Take out the ignition coils from the spark plug wells.Replacement: spark plugs – TOYOTA PRIUS PLUS (ZVW4_). AUTODOC recommends:Remember the sequence of steps for ignition coil demounting.
- Step 8Clean dirt, dust and debris from inside the spark plug wells.Step 9Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
- Step 10Take out the spark plugs.
- Step 11Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
- Step 12Install the new spark plugs into their mounting seats. Use the spark plug socket #16.
- Step 13Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 20 nm torque.Replacement: spark plugs – TOYOTA PRIUS PLUS (ZVW4_). AUTODOC experts recommend:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA Prius Plus (XW40) model
Popular maintenance tutorials for Toyota Prius Plus
Complete guides for changing the Engine spark plug on different TOYOTA PRIUS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your TOYOTA PRIUS PLUS (ZVW4_)
View more
- Can You Hear Your Brakes Squeaking? Learn the Causes and DIY Solutions! | AUTODOC Tips
- DIY starter repair | AUTODOC tips
- Regain Your Confidence on the Road: Easy Headlight Restoration Tips
- Drive with Care: 8 Common Bad Driving Habits Explained | AUTODOC
Most commonly replaced car parts on TOYOTA PRIUS
Time to replace parts? Get even better deals in our Shop app.

SCAN ME