Disclaimer
How to change spark plugs on TOYOTA AURIS (NZE18_, ZRE18_) – replacement guide
downloads:
9
Views:
263
Recommended replacement interval for the part category Spark plug : 90000 km
Important!
This replacement procedure can be used for:
TOYOTA AURIS (NZE18_, ZRE18_) 1.8 (ZRE182_), TOYOTA AURIS (NZE18_, ZRE18_) 1.8 Hybrid (ZWE186_), TOYOTA AURIS (NZE18_, ZRE18_) 1.3 (NRE180_), TOYOTA AURIS (NZE18_, ZRE18_) 1.6 (ZRE181_, ZRE185_) … View more
The steps may slightly vary depending on the car design.
TOYOTA AURIS (NZE18_, ZRE18_) 1.8 (ZRE182_), TOYOTA AURIS (NZE18_, ZRE18_) 1.8 Hybrid (ZWE186_), TOYOTA AURIS (NZE18_, ZRE18_) 1.3 (NRE180_), TOYOTA AURIS (NZE18_, ZRE18_) 1.6 (ZRE181_, ZRE185_) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for AURIS (NZE18_, ZRE18_) and other TOYOTA models
Alternative products

Electronic spray
High-temperature anti-seize lubricant
Drive socket # 10
Spark plug socket # 16
Ratchet wrench
Torque wrench
Fender cover
Replacement: spark plugs – TOYOTA AURIS (NZE18_, ZRE18_). Professionals recommend:
- The replacement procedure is the same for all spark plugs.
- Please note: all work on the car – TOYOTA AURIS (NZE18_, ZRE18_) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Remove the engine cover. - Step 4
Unplug the connectors from the ignition coils. - Step 5
Clean the ignition coils. - Step 6
Unscrew the fasteners of the ignition coils. Use a drive socket #10. Use a ratchet wrench. - Step 7
Take out the ignition coils from the spark plug wells.Replacement: spark plugs – TOYOTA AURIS (NZE18_, ZRE18_). AUTODOC recommends:Remember the sequence of steps for ignition coil demounting. - Step 8Clean dirt, dust and debris from inside the spark plug wells.Step 9
Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench. - Step 10
Take out the spark plugs. - Step 11
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. - Step 12
Install the new spark plugs into their mounting seats. Use the spark plug socket #16. - Step 13
Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 20 nm torque.Replacement: spark plugs – TOYOTA AURIS (NZE18_, ZRE18_). AUTODOC experts recommend:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA Auris Hatchback (E18) model
Popular maintenance tutorials for Toyota Auris e18
Complete guides for changing the Engine spark plug on different TOYOTA AURIS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your TOYOTA AURIS (NZE18_, ZRE18_)
View more
DIY jack restoration | AUTODOC tips
5 Essential Tips for beginner drivers: Avoid Common Mistakes
Easy Steps to Fix Minor Scratches on Your Vehicle | AUTODOC tips
How to Polish Your Car Yourself and Save Money on Garage Services | AUTODOC tips
Most commonly replaced car parts on TOYOTA AURIS
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





















