Disclaimer
How to change spark plugs on FIAT TIPO Saloon (356_) – replacement guide
downloads:
5
Views:
45
Recommended replacement interval for the part category Spark plug : 4 year / 60000 km
Important!
This replacement procedure can be used for:
FIAT TIPO Saloon (356_) 1.4 (356SXA1B) … View more
The steps may slightly vary depending on the car design.
FIAT TIPO Saloon (356_) 1.4 (356SXA1B) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for TIPO Saloon (356_) and other FIAT models
Spark plug
Alternative products
Spark plug
High-temperature anti-seize lubricant
Torque wrench
Drive socket # 10
Spark plug socket # 16
Ratchet wrench
Pincers
Microfibre towel
Fender cover
Replacement: spark plugs – FIAT TIPO Saloon (356_). AUTODOC recommends:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – FIAT TIPO Saloon (356_). Recommended sequence of steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Disconnect the air intake pipe from the air filter housing. - Step 4
Undo the fastening screws of the air filter cover. Use a drive socket #10. Use a ratchet wrench. - Step 5
Release the air filter cover clips. - Step 6
Remove the air filter housing. - Step 7
Cover the throttle body with a microfibre towel to prevent dust and dirt from getting into the system. - Step 8
Remove the spark plug wire connectors from the spark plug wells. Use pincers.Replacement: spark plugs – FIAT TIPO Saloon (356_). AUTODOC experts recommend:Be careful to avoid damaging spark plug wires.Remember the sequence of the spark plug wires connectors. - Step 9
Clean dirt, dust and debris from inside the spark plug wells. - Step 10
Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench. - Step 11
Take out the spark plugs. - Step 12
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. - Step 13
Install the new spark plugs into their mounting seats. Use the spark plug socket #16. - Step 14
Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 25 nm torque.Replacement: spark plugs – FIAT TIPO Saloon (356_). AUTODOC recommends:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FIAT Tipo Saloon (356) model
Popular maintenance tutorials for Fiat Tipo Saloon
Free download PDF
1.39 MB
Free download PDF665.6 KB
Free download PDF1.88 MB
Free download PDF1.64 MB
Free download PDF2.14 MB
Free download PDF2.43 MB
Complete guides for changing the Engine spark plug on different FIAT TIPO models
Free download PDF1.37 MB
Free download PDF1.37 MB
Free download PDF1.46 MB
Free download PDF1.74 MB
Free download PDF1.59 MB
Free download PDF1.83 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FIAT TIPO Saloon (356_)
View more
How to Safely Wash Your Car in Winter Without Damage | AUTODOC tips
Top 7 Manual Transmission Mistakes to Avoid | AUTODOC Tips
The most common problems when buying a used car | AUTODOC
5 Ways You’re Scrubbing Your Car Wrong | AUTODOC Tips
Most commonly replaced car parts on FIAT TIPO
Time to replace parts? Get even better deals in our Shop app.
SCAN ME