Disclaimer
How to change serpentine belt on Fiat Doblo Cargo – replacement guide
downloads:
42
Views:
1661
Recommended replacement interval for the part category Serpentine belt : 120000 km
Important!
This replacement procedure can be used for:
FIAT Doblo Cargo (223_) 1.3 JTD 16V Multijet, FIAT Doblo Cargo (223_) 1.3 JTD 16V … View more
The steps may slightly vary depending on the car design.
FIAT Doblo Cargo (223_) 1.3 JTD 16V Multijet, FIAT Doblo Cargo (223_) 1.3 JTD 16V … View more
The steps may slightly vary depending on the car design.
How to change serpentine belt / v-ribbed belt on FIAT DOBLO 1 (223) [TUTORIAL AUTODOC]

All the parts you need to replace – Poly V-Belt for Doblo Cargo (223_) and other FIAT models
Alternative products

Wire brush
Copper grease
Drive socket # 15
Drive socket # E18
Wheel impact socket #17
Ratchet wrench
Torque wrench
Crow bar
Wheel chock
Replacement: serpentine belt – Fiat Doblo Cargo. Tip from AUTODOC experts:
- All work should be done with the engine stopped.
Replacement: serpentine belt – Fiat Doblo Cargo. Use the following procedure:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3
Raise the front of the car and secure on supports. - Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Fiat Doblo Cargo - Step 5
Remove the wheel. - Step 6
Pry up the hydraulic power steering belt. Use a crowbar. Turn the crankshaft pulley. Use a drive socket #E18. Use a ratchet wrench. - Step 7
Remove the hydraulic power steering belt. - Step 8
Clean the tensioner pulley of the V-ribbed belt. Use a wire brush. - Step 9
Pull aside the V-ribbed belt tensioner pulley. Use a drive socket #15. Use a ratchet wrench. - Step 10
Remove the V-ribbed belt. - Step 11Return the tensioner pulley to its initial position.Replacement: serpentine belt – Fiat Doblo Cargo. AUTODOC recommends:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.Step 12
Install the V-ribbed belt.Replacement: serpentine belt – Fiat Doblo Cargo. AUTODOC experts recommend:Make sure that the V-ribbed belt fits all pulleys snugly.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FIAT Doblo I Cargo (223) model
Popular maintenance tutorials for Fiat Doblo Cargo
Complete guides for changing the Alternator belt on different FIAT DOBLO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FIAT Doblo Cargo (223_)
View more
How to easily repair a punctured tyre | AUTODOC tips
How to Swap an M50 Engine in a BMW E30 Turbo | AUTODOC Project
Don’t Replace, Restore: Fixing Damaged Threads at Home
Easy Steps to Fix Minor Scratches on Your Vehicle | AUTODOC tips
Most commonly replaced car parts on FIAT DOBLO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





















