Disclaimer
How to change serpentine belt on Renault Megane Scenic – replacement guide
downloads:
27
Views:
307
Recommended replacement interval for the part category Serpentine belt : 5 year / 120000 km
Important!
This replacement procedure can be used for:
RENAULT MEGANE Scenic (JA0/1_) 1.6 16V (JA0B, JA04, JA11, JA00) … View more
The steps may slightly vary depending on the car design.
RENAULT MEGANE Scenic (JA0/1_) 1.6 16V (JA0B, JA04, JA11, JA00) … View more
The steps may slightly vary depending on the car design.
How to change serpentine belt on RENAULT MEGANE SCENIC [TUTORIAL AUTODOC]

All the parts you need to replace – Poly V-Belt for MEGANE Scenic (JA0/1_) and other RENAULT models
Alternative products

Torque wrench
Combination spanner #13
Drive socket # 18
Wheel impact socket #19
Ratchet wrench
Phillips Screwdriver
Fender cover
Wheel chock
AUTODOC recommends:
- Please note: all work on the car – Renault Megane Scenic – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1
Open the bonnet. - Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car. - Step 3
Secure the wheels with chocks. Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 4
Raise the car.Replacement: serpentine belt – Renault Megane Scenic. Tip from AUTODOC:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands. - Step 5
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Renault Megane Scenic - Step 6
Remove the wheel. - Step 7
Unscrew and remove the wheel arch cover fasteners. Use a Phillips screwdriver. - Step 8
Remove the wheel arch cover. - Step 9
Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #13. - Step 10
Remove the V-ribbed belt.Replacement: serpentine belt – Renault Megane Scenic. Professionals recommend:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary. - Step 11
Install the V-ribbed belt.AUTODOC recommends:Make sure that the V-ribbed belt fits all pulleys snugly. - Step 12
Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #13. - Step 13
Place the V-ribbed belt on the tensioner pulley. Return the tensioner pulley to its initial position. - Step 14
Rotate the crankshaft several times to check whether the new V-ribbed belt is working correctly. Use a drive socket #18. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Megane Scenic (JA) model
Popular maintenance tutorials for Renault Megane Scenic
Complete guides for changing the Alternator belt on different RENAULT MEGANE models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT MEGANE Scenic (JA0/1_)
View more
5 mistakes when replacing consumables
CHECK ENGINE light turned on – step-by-step guide on what to do
BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project
Which Coolant is Best? Comparison Test | AUTODOC
Most commonly replaced car parts on RENAULT MEGANE
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

























