When to replace the Poly V-Belt on your RENAULT MEGANE
Recommended replacement interval for the part category Serpentine belt : 5 year / 120000 km
Important!
This replacement procedure can be used for:
RENAULT MEGANE II Coupé-Cabriolet (EM0/1_) 2.0, RENAULT MEGANE II Coupé-Cabriolet (EM0/1_) 1.9 dCi, RENAULT MEGANE II Coupé-Cabriolet (EM0/1_) 2.0 16V Turbo, RENAULT MEGANE II Coupé-Cabriolet (EM0/1_) 1.9 dCi, RENAULT MEGANE II Coupé-Cabriolet (EM0/1_) 1.9 dCi, RENAULT MEGANE II Coupé-Cabriolet (EM0/1_) 1.9 dCi, RENAULT MEGANE II Coupé-Cabriolet (EM0/1_) 2.0 (EM0S) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for MEGANE II Coupé-Cabriolet (EM0/1_) and other RENAULT models
Alternative products
How to change Serpentine belt on Megane 2 CC 1.9 dCi – step-by-step instructions for straightforward car repair Serpentine belt
Tools
Replacement: serpentine belt – RENAULT MEGANE II Coupé-Cabriolet (EM0/1_). Tools you need:
Wire brush
Copper grease
Drive socket # 13
Drive socket # 16
Torx bit T25
Wheel impact socket #19
Ratchet wrench
Tap wrench
Ear clamp pliers
Fender cover
Wheel chock
Replacement: serpentine belt – RENAULT MEGANE II Coupé-Cabriolet (EM0/1_). AUTODOC recommends:
  • All work should be done with the engine stopped.
Replacement: serpentine belt – RENAULT MEGANE II Coupé-Cabriolet (EM0/1_). Take the following steps:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Poly V-Belt on Megane 2 CC 2003 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 4
    How to replace RENAULT MEGANE II Coupé-Cabriolet (EM0/1_) 1.9 dCi 2004 Poly V-Belt - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 5
    Lift the car using a jack or place it over an inspection pit.
    Step 6
    Megane 2 CC 2.0 2005 Poly V-Belt replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. RENAULT MEGANE II Coupé-Cabriolet (EM0/1_)
  4. Step 7
    Changing Poly V-Belt on RENAULT MEGANE II Coupé-Cabriolet (EM0/1_) 1.6 16V 2006 by yourself
    Remove the wheel.
  5. Step 8
    How to remove RENAULT MEGANE 1.5 dCi 2007 Poly V-Belt - online easy-to-follow instructions
    Unscrew and remove the wheel arch cover fasteners. Use ear clamp pliers. Use Torx T25. Use a ratchet wrench.
  6. Step 9
    How to replace Poly V-Belt on RENAULT MEGANE II Coupé-Cabriolet (EM0/1_) 2008: download PDF manuals and video instructions
    Remove the wheel arch cover.
  7. Step 10
    How hard is it to do yourself: Poly V-Belt replacement on Megane 2 CC 2.0 16V Turbo 2009 - download illustrated guide
    Unscrew the fasteners connecting the bumper reinforcement bar to the subframe. Use a drive socket #13.
  8. Step 11
    Need to know how to renew Poly V-Belt on RENAULT MEGANE 2010? This free workshop manual will help you to do it yourself
    Pull aside the V-ribbed belt tensioner pulley. Use a drive socket #16. Use a tap wrench.
  9. Step 12
    Changing of Poly V-Belt on Megane 2 CC 2003 won't be an issue if you follow this illustrated step-by-step guide
    Remove the V-ribbed belt.
  10. Step 13
    Return the tensioner pulley to its initial position.
    Replacement: serpentine belt – RENAULT MEGANE II Coupé-Cabriolet (EM0/1_). AUTODOC experts recommend:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
    Step 14
    RENAULT MEGANE 2.0 Poly V-Belt replacement: online guides and video tutorials
    Install the V-ribbed belt.
    Replacement: serpentine belt – RENAULT MEGANE II Coupé-Cabriolet (EM0/1_). Tip from AUTODOC:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  11. Step 15
    Replacing Poly V-Belt on Megane 2 CC 2005 1.9 dCi by yourself
    Pull aside the V-ribbed belt tensioner pulley. Use a drive socket #16. Use a tap wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the RENAULT Megane II Coupé-Cabriolet (EM) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY RENAULT MEGANE II Coupé-Cabriolet (EM0/1_) Poly V-Belt replacement - online guide
Tips & tricks for your RENAULT MEGANE II Coupé-Cabriolet (EM0/1_)
View more
  • How to change Alternator belt on RENAULT MEGANE II Coupé-Cabriolet (EM0/1_) 1.6 - replacement tricks
    BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project
  • Changing Auxiliary belt Megane 2 CC 1.9 dCi - Replacement Tips
    Top 7 signs of a bad starter
  • Maintenance Hacks - RENAULT MEGANE II Coupé-Cabriolet (EM0/1_) 2.0 Poly V-belt replacement guide
    5 more brake repair mistakes | Stop making these brake repair mistakes
  • Replace Drive belt on Megane 2 CC - free video tips
    How to prevent car windows from fogging up | AUTODOC tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
RENAULT MEGANE II Coupé-Cabriolet (EM0/1_) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME