When to replace the Poly V-Belt on your RENAULT MEGANE
Recommended replacement interval for the part category Serpentine belt : 6 year / 120000 km
Important!
This replacement procedure can be used for:
RENAULT Megane III Hatchback (BZ0/1_) 2.0 TCe (BZ0K), RENAULT Megane III Hatchback (BZ0/1_) 1.9 dCi (BZ0N, BZ0J), RENAULT Megane III Hatchback (BZ0/1_) 2.0 TCe, RENAULT Megane III Hatchback (BZ0/1_) 2.0 TCe 220 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for Megane III Hatchback (BZ0/1_) and other RENAULT models
How to change Serpentine belt on Renault Megane 3 1.5 dCi (BZ09, BZ0D, BZ1W, BZ29, BZ14) – step-by-step instructions for straightforward car repair
Serpentine belt
How to change V-Ribbed Belt Set on Renault Megane 3 1.5 dCi (BZ09, BZ0D, BZ1W, BZ29, BZ14) – step-by-step instructions for straightforward car repair
V-Ribbed Belt Set
Tools
Replacement: serpentine belt – RENAULT MEGANE III Hatchback (BZ0_). Tools you need:
Wire brush
Copper grease
Drive socket # 13
Drive socket # 16
Torx bit T25
Wheel impact socket #19
Ratchet wrench
Tap wrench
Ear clamp pliers
Fender cover
Wheel chock
Replacement: serpentine belt – RENAULT MEGANE III Hatchback (BZ0_). AUTODOC recommends:
  • All work should be done with the engine stopped.
Replacement: serpentine belt – RENAULT MEGANE III Hatchback (BZ0_). Take the following steps:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Poly V-Belt on Renault Megane 3 2008 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 4
    How to replace RENAULT Megane III Hatchback (BZ0/1_) 1.5 dCi (BZ09, BZ0D, BZ1W, BZ29, BZ14) 2009 Poly V-Belt - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 5
    Lift the car using a jack or place it over an inspection pit.
    Step 6
    Renault Megane 3 1.5 dCi 2010 Poly V-Belt replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. RENAULT MEGANE III Hatchback (BZ0_)
  4. Step 7
    Changing Poly V-Belt on RENAULT Megane III Hatchback (BZ0/1_) 1.6 16V 2011 by yourself
    Remove the wheel.
  5. Step 8
    How to remove RENAULT MEGANE 1.4 TCe 2012 Poly V-Belt - online easy-to-follow instructions
    Unscrew and remove the wheel arch cover fasteners. Use ear clamp pliers. Use Torx T25. Use a ratchet wrench.
  6. Step 9
    How to replace Poly V-Belt on RENAULT Megane III Hatchback (BZ0/1_) 2013: download PDF manuals and video instructions
    Remove the wheel arch cover.
  7. Step 10
    How hard is it to do yourself: Poly V-Belt replacement on Renault Megane 3 1.5 dCi (BZ1G, BZ1W, BZ0R) 2014 - download illustrated guide
    Unscrew the fasteners connecting the bumper reinforcement bar to the subframe. Use a drive socket #13.
  8. Step 11
    Need to know how to renew Poly V-Belt on RENAULT MEGANE 2015? This free workshop manual will help you to do it yourself
    Pull aside the V-ribbed belt tensioner pulley. Use a drive socket #16. Use a tap wrench.
  9. Step 12
    Changing of Poly V-Belt on Renault Megane 3 2016 won't be an issue if you follow this illustrated step-by-step guide
    Remove the V-ribbed belt.
  10. Step 13
    Return the tensioner pulley to its initial position.
    Replacement: serpentine belt – RENAULT MEGANE III Hatchback (BZ0_). AUTODOC experts recommend:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
    Step 14
    RENAULT MEGANE 1.5 dCi Poly V-Belt replacement: online guides and video tutorials
    Install the V-ribbed belt.
    Replacement: serpentine belt – RENAULT MEGANE III Hatchback (BZ0_). Tip from AUTODOC:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  11. Step 15
    Replacing Poly V-Belt on Renault Megane 3 2018 1.5 dCi (BZ09, BZ0D, BZ1W, BZ29, BZ14) by yourself
    Pull aside the V-ribbed belt tensioner pulley. Use a drive socket #16. Use a tap wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
RENAULT Megane III Hatchback (BZ0/1_) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY RENAULT Megane III Hatchback (BZ0/1_) Poly V-Belt replacement - online guide
Tips & tricks for your RENAULT Megane III Hatchback (BZ0/1_)
View more
  • How to change Alternator belt on RENAULT Megane III Hatchback (BZ0/1_) 1.9 dCi - replacement tricks
    How to repair a chipped or cracked windscreen | AUTODOC tips
  • Changing Auxiliary belt Renault Megane 3 1.5 dCi (BZ09, BZ0D, BZ1W, BZ29, BZ14) - Replacement Tips
    TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
  • Maintenance Hacks - RENAULT Megane III Hatchback (BZ0/1_) 1.5 dCi Poly V-belt replacement guide
    DIY jack restoration | AUTODOC tips
  • Replace Drive belt on Renault Megane 3 - free video tips
    What to do if your car's air conditioning isn't working properly | AUTODOC tips