
Disclaimer
How to change spark plugs on RENAULT MEGANE Scenic (JA0/1_) – replacement guide
downloads:
5
Views:
86

Recommended replacement interval for the part category Spark plug : 60000 km
Important!
This replacement procedure can be used for:
RENAULT MEGANE Scenic (JA0/1_) 1.6 16V (JA0B, JA04, JA11, JA00) … View more
The steps may slightly vary depending on the car design.
RENAULT MEGANE Scenic (JA0/1_) 1.6 16V (JA0B, JA04, JA11, JA00) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for MEGANE Scenic (JA0/1_) and other RENAULT models
Spark plug
Alternative products

High-temperature anti-seize lubricant
Electronic spray
Drive socket # 10
Spark plug socket # 16
Ratchet wrench
Torque wrench
Fender cover
Replacement: spark plugs – RENAULT MEGANE Scenic (JA0/1_). Professionals recommend:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – RENAULT MEGANE Scenic (JA0/1_). Take the following steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Unplug the connectors from the ignition coils.
- Step 4Unscrew the ignition coil bracket. Use a drive socket #10. Use a ratchet wrench.
- Step 5Take out the ignition coils from the spark plug wells.Replacement: spark plugs – RENAULT MEGANE Scenic (JA0/1_). Tip from AUTODOC experts:Remember the sequence of steps for ignition coil demounting.
- Step 6Clean dirt, dust and debris from inside the spark plug wells.
- Step 7Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
- Step 8Take out the spark plugs.
- Step 9Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
- Step 10Install the new spark plugs into their mounting seats.
- Step 11Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 25 nm torque.Replacement: spark plugs – RENAULT MEGANE Scenic (JA0/1_). Tip:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Megane Scenic (JA) model
Popular maintenance tutorials for Renault Megane Scenic
Complete guides for changing the Engine spark plug on different RENAULT MEGANE models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT MEGANE Scenic (JA0/1_)
View more
- How to Fix a Squealing Belt: Causes & Solutions | AUTODOC Expert Tips
- 3 essential tips for choosing summer tyres | Get ready for warmer weather
- Top 5 mistakes when replacing spark plugs | AUTODOC tips
- Top 5 reasons why the suspension knocks | AUTODOC tips
Most commonly replaced car parts on RENAULT MEGANE
Time to replace parts? Get even better deals in our Shop app.

SCAN ME