When to replace the Poly V-Belt on your RENAULT MEGANE
Recommended replacement interval for the part category Serpentine belt : 5 year / 120000 km
Important!
This replacement procedure can be used for:
RENAULT MEGANE II (BM0/1_, CM0/1_) 2.0 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for MEGANE II (BM0/1_, CM0/1_) and other RENAULT models
Tools
Replacement: serpentine belt – RENAULT MEGANE II (BM0/1_, CM0/1_). Tools you need:
Torque wrench
Combination spanner #13
Drive socket # 18
Wheel impact socket #19
Ratchet wrench
Phillips Screwdriver
Fender cover
Wheel chock
AUTODOC recommends:
  • Please note: all work on the car – RENAULT MEGANE II (BM0/1_, CM0/1_) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Poly V-Belt on Renault Megane 2 2001 - free PDF and video manuals
    Secure the wheels with chocks. Loosen the wheel mounting bolts. Use wheel impact socket #19.
  2. Step 4
    Raise the car.
    Replacement: serpentine belt – RENAULT MEGANE II (BM0/1_, CM0/1_). Tip from AUTODOC:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 5
    How to replace RENAULT MEGANE II (BM0/1_, CM0/1_) 1.9 dCi 2002 Poly V-Belt - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. RENAULT MEGANE II (BM0/1_, CM0/1_)
  3. Step 6
    Renault Megane 2 1.6 16V 2003 Poly V-Belt replacement: free workshop manuals
    Remove the wheel.
  4. Step 7
    Changing Poly V-Belt on RENAULT MEGANE II (BM0/1_, CM0/1_) 1.5 dCi (BM1E, CM1E) 2004 by yourself
    Unscrew and remove the wheel arch cover fasteners. Use a Phillips screwdriver.
  5. Step 8
    How to remove RENAULT MEGANE 1.5 dCi (BM1F, CM1F) 2005 Poly V-Belt - online easy-to-follow instructions
    Remove the wheel arch cover.
  6. Step 9
    How to replace Poly V-Belt on RENAULT MEGANE II (BM0/1_, CM0/1_) 2006: download PDF manuals and video instructions
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #13.
  7. Step 10
    How hard is it to do yourself: Poly V-Belt replacement on Renault Megane 2 2.0 Renault Sport 2007 - download illustrated guide
    Remove the V-ribbed belt.
    Replacement: serpentine belt – RENAULT MEGANE II (BM0/1_, CM0/1_). Professionals recommend:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
  8. Step 11
    Need to know how to renew Poly V-Belt on RENAULT MEGANE 2008? This free workshop manual will help you to do it yourself
    Install the V-ribbed belt.
    AUTODOC recommends:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  9. Step 12
    Changing of Poly V-Belt on Renault Megane 2 2009 won't be an issue if you follow this illustrated step-by-step guide
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #13.
  10. Step 13
    RENAULT MEGANE 1.9 dCi Poly V-Belt replacement: online guides and video tutorials
    Place the V-ribbed belt on the tensioner pulley. Return the tensioner pulley to its initial position.
  11. Step 14
    Replacing Poly V-Belt on Renault Megane 2 2011 1.9 dCi by yourself
    Rotate the crankshaft several times to check whether the new V-ribbed belt is working correctly. Use a drive socket #18. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the RENAULT Megane II Hatchback (BM, CM) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
RENAULT MEGANE II (BM0/1_, CM0/1_) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY RENAULT MEGANE II (BM0/1_, CM0/1_) Poly V-Belt replacement - online guide
Tips & tricks for your RENAULT MEGANE II (BM0/1_, CM0/1_)
View more
  • How to change Alternator belt on RENAULT MEGANE II (BM0/1_, CM0/1_) 1.5 dCi (BM0F, BM0T, BM2B, CM0F, CM0T) - replacement tricks
    Top 6 products for enhancing your car | AUTODOC tips
  • Changing Auxiliary belt Renault Megane 2 1.9 dCi - Replacement Tips
    DIY alternator repair | AUTODOC tips
  • Maintenance Hacks - RENAULT MEGANE II (BM0/1_, CM0/1_) 1.6 16V Poly V-belt replacement guide
    How to polish your car | AUTODOC tips
  • Replace Drive belt on Renault Megane 2 - free video tips
    How to check your head gasket | AUTODOC