Disclaimer
How to change serpentine belt on RENAULT MEGANE III Grandtour (KZ0/1) – replacement guide
downloads:
17
Views:
574
Recommended replacement interval for the part category Serpentine belt : 6 year / 120000 km
Important!
This replacement procedure can be used for:
RENAULT MEGANE III Grandtour (KZ0/1) 2.0 TCe, RENAULT MEGANE III Grandtour (KZ0/1) 2.0 TCe, RENAULT MEGANE III Grandtour (KZ0/1) 2.0 TCe (KZ0K, KZ1T), RENAULT MEGANE III Grandtour (KZ0/1) 1.9 dCi (KZ0J, KZ0N, KZ1S) … View more
The steps may slightly vary depending on the car design.
RENAULT MEGANE III Grandtour (KZ0/1) 2.0 TCe, RENAULT MEGANE III Grandtour (KZ0/1) 2.0 TCe, RENAULT MEGANE III Grandtour (KZ0/1) 2.0 TCe (KZ0K, KZ1T), RENAULT MEGANE III Grandtour (KZ0/1) 1.9 dCi (KZ0J, KZ0N, KZ1S) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for MEGANE III Grandtour (KZ0/1) and other RENAULT models
Alternative products

Wire brush
Copper grease
Drive socket # 13
Drive socket # 16
Torx bit T25
Wheel impact socket #19
Ratchet wrench
Tap wrench
Ear clamp pliers
Fender cover
Wheel chock
Replacement: serpentine belt – RENAULT MEGANE III Grandtour (KZ0/1). AUTODOC recommends:
- All work should be done with the engine stopped.
Replacement: serpentine belt – RENAULT MEGANE III Grandtour (KZ0/1). Take the following steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Secure the wheels with chocks. - Step 4
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 5Lift the car using a jack or place it over an inspection pit.Step 6
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. RENAULT MEGANE III Grandtour (KZ0/1) - Step 7
Remove the wheel. - Step 8
Unscrew and remove the wheel arch cover fasteners. Use ear clamp pliers. Use Torx T25. Use a ratchet wrench. - Step 9
Remove the wheel arch cover. - Step 10
Unscrew the fasteners connecting the bumper reinforcement bar to the subframe. Use a drive socket #13. - Step 11
Pull aside the V-ribbed belt tensioner pulley. Use a drive socket #16. Use a tap wrench. - Step 12
Remove the V-ribbed belt. - Step 13Return the tensioner pulley to its initial position.Replacement: serpentine belt – RENAULT MEGANE III Grandtour (KZ0/1). AUTODOC experts recommend:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.Step 14
Install the V-ribbed belt.Replacement: serpentine belt – RENAULT MEGANE III Grandtour (KZ0/1). Tip from AUTODOC:Make sure that the V-ribbed belt fits all pulleys snugly. - Step 15
Pull aside the V-ribbed belt tensioner pulley. Use a drive socket #16. Use a tap wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Megane III Grandtour (KZ) model
Popular maintenance tutorials for Renault Megane 3 Grandtour
Complete guides for changing the Alternator belt on different RENAULT MEGANE models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT MEGANE III Grandtour (KZ0/1)
View more
How to remove scratches from car plastic | AUTODOC tips
#TPMS Explained: Why Your Light is On and How to Respond Safely
Why does it burn oil? The main cause of oil consumption in EA888 Gen 1
Top 4 Car Cleaning Products to Protect Your Car's Body | AUTODOC Tips
Most commonly replaced car parts on RENAULT MEGANE
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


























