
Disclaimer
How to change serpentine belt on RENAULT MEGANE II Estate (KM0/1_) – replacement guide
downloads:
3
Views:
80

Recommended replacement interval for the part category Serpentine belt : 5 year / 120000 km
Important!
This replacement procedure can be used for:
RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi, RENAULT MEGANE II Estate (KM0/1_) 2.0, RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi (KMRG, KM1G, KM0G, KM2C), RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi, RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi, RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi, RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi … View more
The steps may slightly vary depending on the car design.
RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi, RENAULT MEGANE II Estate (KM0/1_) 2.0, RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi (KMRG, KM1G, KM0G, KM2C), RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi, RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi, RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi, RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for MEGANE II Estate (KM0/1_) and other RENAULT models
Serpentine belt
Alternative products

Wire brush
Copper grease
Drive socket # 13
Drive socket # 16
Torx bit T25
Wheel impact socket #19
Ratchet wrench
Tap wrench
Ear clamp pliers
Fender cover
Wheel chock
Replacement: serpentine belt – RENAULT MEGANE II Estate (KM0/1_). AUTODOC recommends:
- All work should be done with the engine stopped.
Replacement: serpentine belt – RENAULT MEGANE II Estate (KM0/1_). Take the following steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Secure the wheels with chocks.
- Step 4Loosen the wheel mounting bolts. Use wheel impact socket #19.
- Step 5Lift the car using a jack or place it over an inspection pit.Step 6Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. RENAULT MEGANE II Estate (KM0/1_)
- Step 7Remove the wheel.
- Step 8Unscrew and remove the wheel arch cover fasteners. Use ear clamp pliers. Use Torx T25. Use a ratchet wrench.
- Step 9Remove the wheel arch cover.
- Step 10Unscrew the fasteners connecting the bumper reinforcement bar to the subframe. Use a drive socket #13.
- Step 11Pull aside the V-ribbed belt tensioner pulley. Use a drive socket #16. Use a tap wrench.
- Step 12Remove the V-ribbed belt.
- Step 13Return the tensioner pulley to its initial position.Replacement: serpentine belt – RENAULT MEGANE II Estate (KM0/1_). AUTODOC experts recommend:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.Step 14Install the V-ribbed belt.Replacement: serpentine belt – RENAULT MEGANE II Estate (KM0/1_). Tip from AUTODOC:Make sure that the V-ribbed belt fits all pulleys snugly.
- Step 15Pull aside the V-ribbed belt tensioner pulley. Use a drive socket #16. Use a tap wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Megane II Sport Tourer (KM) model
Popular maintenance tutorials for Renault Megane 2 Sport Tourer
Complete guides for changing the Alternator belt on different RENAULT MEGANE models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT MEGANE II Estate (KM0/1_)
View more
- How to restore a steering wheel | AUTODOC tips
- Top 5 Mistakes to Avoid for Safe Engine Bay Repairs | AUTODOC Tips
- How to remove rust | AUTODOC tips
- Drive with Care: 8 Common Bad Driving Habits Explained | AUTODOC
Most commonly replaced car parts on RENAULT MEGANE
Time to replace parts? Get even better deals in our Shop app.

SCAN ME