Disclaimer
How to change spark plugs on RENAULT MEGANE III Grandtour (KZ0/1) – replacement guide
downloads:
9
Views:
59
Recommended replacement interval for the part category Spark plug : 60000 km
Important!
This replacement procedure can be used for:
RENAULT MEGANE III Grandtour (KZ0/1) 1.6 BiFuel (KZ03), RENAULT MEGANE III Grandtour (KZ0/1) 1.6 16V (KZ0U, KZ1B, KZ1U), RENAULT MEGANE III Grandtour (KZ0/1) 1.6 16V (KZ0H) … View more
The steps may slightly vary depending on the car design.
RENAULT MEGANE III Grandtour (KZ0/1) 1.6 BiFuel (KZ03), RENAULT MEGANE III Grandtour (KZ0/1) 1.6 16V (KZ0U, KZ1B, KZ1U), RENAULT MEGANE III Grandtour (KZ0/1) 1.6 16V (KZ0H) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for MEGANE III Grandtour (KZ0/1) and other RENAULT models
Alternative products

High-temperature anti-seize lubricant
Electronic spray
Drive socket # 10
Spark plug socket # 16
Ratchet wrench
Torque wrench
Fender cover
Replacement: spark plugs – RENAULT MEGANE III Grandtour (KZ0/1). Professionals recommend:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – RENAULT MEGANE III Grandtour (KZ0/1). Take the following steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Unplug the connectors from the ignition coils. - Step 4
Unscrew the ignition coil bracket. Use a drive socket #10. Use a ratchet wrench. - Step 5
Take out the ignition coils from the spark plug wells.Replacement: spark plugs – RENAULT MEGANE III Grandtour (KZ0/1). Tip from AUTODOC experts:Remember the sequence of steps for ignition coil demounting. - Step 6
Clean dirt, dust and debris from inside the spark plug wells. - Step 7
Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench. - Step 8
Take out the spark plugs. - Step 9
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. - Step 10
Install the new spark plugs into their mounting seats. - Step 11
Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 25 nm torque.Replacement: spark plugs – RENAULT MEGANE III Grandtour (KZ0/1). Tip:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Megane III Grandtour (KZ) model
Popular maintenance tutorials for Renault Megane 3 Grandtour
Complete guides for changing the Engine spark plug on different RENAULT MEGANE models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT MEGANE III Grandtour (KZ0/1)
View more
How to inspect and troubleshoot your car heater when it’s not working
Understanding Airbag Light Warnings | Essential Tips for Car Safety
Top 5 car noises you shouldn't ignore
5 Ways You’re Scrubbing Your Car Wrong | AUTODOC Tips
Most commonly replaced car parts on RENAULT MEGANE
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




















