
Disclaimer
How to change camshaft position sensor on RENAULT Megane II Sport Tourer (KM) – replacement guide
downloads:
0
Views:
2
Important!
This replacement procedure can be used for:
RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi, RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi (KMRG, KM1G, KM0G, KM2C), RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi, RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi, RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi, RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi … View more
The steps may slightly vary depending on the car design.
RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi, RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi (KMRG, KM1G, KM0G, KM2C), RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi, RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi, RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi, RENAULT MEGANE II Estate (KM0/1_) 1.9 dCi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Camshaft Sensor for MEGANE II Estate (KM0/1_) and other RENAULT models
Alternative products

Wire brush
All-purpose cleaning spray
Electronic spray
Torque wrench
10 mm socket
Ratchet wrench
Mounting lever
Paper towels
Replacement: camshaft position sensor – RENAULT MEGANE II Estate (KM0/1_). AUTODOC recommends:
- All the work should be carried out with the ignition switched off.
Replacement: camshaft position sensor – RENAULT MEGANE II Estate (KM0/1_). Take the following steps:
- Step 1Lift the vehicle using a vehicle lift or place it over an inspection pit.Step 2
Clean the fastener of the camshaft position sensor. Use a wire brush. Use an all-purpose cleaning spray. - Step 3
Detach the connector of the camshaft position sensor. - Step 4
Unscrew the fastener of the camshaft position sensor. Use a 10 mm socket. Use a ratchet wrench. - Step 5
Remove the fastening bolt. - Step 6
Remove the camshaft position sensor. - Step 7
Plug the sensor mounting hole with a paper towel to prevent dust and dirt from getting in. - Step 8
Clean the mounting seat of the camshaft position sensor. Use an all-purpose cleaning spray. - Step 9
Treat the connector of the camshaft position sensor. Use an electronic spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Megane II Sport Tourer (KM) model
Popular maintenance tutorials for Renault Megane 2 Sport Tourer
Complete guides for changing the Camshaft position sensor on different RENAULT MEGANE models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT MEGANE II Estate (KM0/1_)
View more
What to do if your car’s bonnet won’t open | AUTODOC tips
How to make an injector test bench yourself
Top 5 possible reasons your car is shaking or vibrating
Kolbenschmidt plastic gauge overview
Most commonly replaced car parts on RENAULT MEGANE
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




























