When to replace the Poly V-Belt on your RENAULT MEGANE
Recommended replacement interval for the part category Serpentine belt : 5 year / 120000 km
Important!
This replacement procedure can be used for:
RENAULT MEGANE I Cabriolet (EA0/1_) 2.0 16V, RENAULT MEGANE I Cabriolet (EA0/1_) 2.0 16V IDE (EA03, EA0P, EA14), RENAULT MEGANE I Cabriolet (EA0/1_) 1.4 16V (EA0D, EA1H, EA0W, EA10), RENAULT MEGANE I Cabriolet (EA0/1_) 1.6 16V (EA04, EA0B, EA11, EA1J) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for MEGANE I Cabriolet (EA0/1_) and other RENAULT models
Alternative products
How to change Serpentine belt on Renault Megane 1 Convertible 1.6 16V (EA04, EA0B, EA11, EA1J) – step-by-step instructions for straightforward car repair Serpentine belt
Tools
Replacement: serpentine belt – RENAULT MEGANE I Cabriolet (EA0/1_). Tools you need:
Torque wrench
Combination spanner #13
Drive socket # 18
Wheel impact socket #19
Ratchet wrench
Phillips Screwdriver
Fender cover
Wheel chock
AUTODOC recommends:
  • Please note: all work on the car – RENAULT MEGANE I Cabriolet (EA0/1_) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Poly V-Belt on Renault Megane 1 Convertible 1996 - free PDF and video manuals
    Secure the wheels with chocks. Loosen the wheel mounting bolts. Use wheel impact socket #19.
  2. Step 4
    Raise the car.
    Replacement: serpentine belt – RENAULT MEGANE I Cabriolet (EA0/1_). Tip from AUTODOC:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 5
    How to replace RENAULT MEGANE I Cabriolet (EA0/1_) 1.6 16V (EA04, EA0B, EA11, EA1J) 1997 Poly V-Belt - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. RENAULT MEGANE I Cabriolet (EA0/1_)
  3. Step 6
    Renault Megane 1 Convertible 1.6 e 1998 Poly V-Belt replacement: free workshop manuals
    Remove the wheel.
  4. Step 7
    Changing Poly V-Belt on RENAULT MEGANE I Cabriolet (EA0/1_) 2.0 16V IDE 1999 by yourself
    Unscrew and remove the wheel arch cover fasteners. Use a Phillips screwdriver.
  5. Step 8
    How to remove RENAULT MEGANE 2.0 2000 Poly V-Belt - online easy-to-follow instructions
    Remove the wheel arch cover.
  6. Step 9
    How to replace Poly V-Belt on RENAULT MEGANE I Cabriolet (EA0/1_) 2001: download PDF manuals and video instructions
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #13.
  7. Step 10
    How hard is it to do yourself: Poly V-Belt replacement on Renault Megane 1 Convertible 2.0 i (EA0G) 2002 - download illustrated guide
    Remove the V-ribbed belt.
    Replacement: serpentine belt – RENAULT MEGANE I Cabriolet (EA0/1_). Professionals recommend:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
  8. Step 11
    Need to know how to renew Poly V-Belt on RENAULT MEGANE 2003? This free workshop manual will help you to do it yourself
    Install the V-ribbed belt.
    AUTODOC recommends:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  9. Step 12
    Changing of Poly V-Belt on Renault Megane 1 Convertible 1996 won't be an issue if you follow this illustrated step-by-step guide
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #13.
  10. Step 13
    RENAULT MEGANE 1.6 e Poly V-Belt replacement: online guides and video tutorials
    Place the V-ribbed belt on the tensioner pulley. Return the tensioner pulley to its initial position.
  11. Step 14
    Replacing Poly V-Belt on Renault Megane 1 Convertible 1998 1.6 16V (EA04, EA0B, EA11, EA1J) by yourself
    Rotate the crankshaft several times to check whether the new V-ribbed belt is working correctly. Use a drive socket #18. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the RENAULT Megane I Convertible (EA) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY RENAULT MEGANE I Cabriolet (EA0/1_) Poly V-Belt replacement - online guide
Tips & tricks for your RENAULT MEGANE I Cabriolet (EA0/1_)
View more
  • How to change Alternator belt on RENAULT MEGANE I Cabriolet (EA0/1_) 1.4 16V - replacement tricks
    Top 5 car noises you shouldn't ignore
  • Changing Auxiliary belt Renault Megane 1 Convertible 1.6 16V (EA04, EA0B, EA11, EA1J) - Replacement Tips
    Don’t Replace, Just Polish! Headlight Restoration with AUTODOC
  • Maintenance Hacks - RENAULT MEGANE I Cabriolet (EA0/1_) 1.6 e Poly V-belt replacement guide
    #DIY Tips for Fixing Your Car's Air Conditioning Issues | Don't Wait for Costly Repairs!
  • Replace Drive belt on Renault Megane 1 Convertible - free video tips
    Understanding Car Tools: The Key Differences You Need to Know | AUTODOC tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
RENAULT MEGANE I Cabriolet (EA0/1_) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME