Important!
This replacement procedure can be used for:
RENAULT MEGANE I Cabriolet (EA0/1_) 1.6 e (EA0F), RENAULT MEGANE I Cabriolet (EA0/1_) 2.0 16V (EA0H), RENAULT MEGANE I Cabriolet (EA0/1_) 2.0 (EA0G), RENAULT MEGANE I Cabriolet (EA0/1_) 1.6 16V (EA04, EA0B, EA11, EA1J), RENAULT MEGANE I Cabriolet (EA0/1_) 2.0 i (EA0G), RENAULT MEGANE I Cabriolet (EA0/1_) 1.4 16V (EA0D, EA1H, EA0W, EA10), RENAULT MEGANE I Cabriolet (EA0/1_) 2.0 16V IDE (EA03, EA0P, EA14), RENAULT MEGANE I Cabriolet (EA0/1_) 2.0 16V View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for MEGANE I Cabriolet (EA0/1_) and other RENAULT models
Alternative products
How to change Wheel bearing kit on Renault Megane 1 Convertible 1.6 16V (EA04, EA0B, EA11, EA1J) – step-by-step instructions for straightforward car repair Wheel bearing kit
Tools
Replacement: wheel bearing – RENAULT MEGANE I Cabriolet (EA0/1_). List of the tools you'll need:
Wire brush
WD-40 spray
All-purpose cleaning spray
Copper grease
Drive socket # 30
Wheel impact socket #17
Torque wrench
Tap wrench
Hammer
Circlip pliers
Bush and bearing driver set
Rubber mallet
Crow bar
Wheel chock
Replacement: wheel bearing – RENAULT MEGANE I Cabriolet (EA0/1_). Professionals recommend:
  • Do not re-use the bearing assembly of your RENAULT MEGANE I Cabriolet (EA0/1_) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – RENAULT MEGANE I Cabriolet (EA0/1_). Recommended sequence of steps:
  1. Step 1
    How to change Wheel Bearing on Renault Megane 1 Convertible 1996 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace RENAULT MEGANE I Cabriolet (EA0/1_) 1.6 16V (EA04, EA0B, EA11, EA1J) 1997 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Renault Megane 1 Convertible 1.6 e 1998 Wheel Bearing replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. RENAULT MEGANE I Cabriolet (EA0/1_)
  4. Step 5
    Changing Wheel Bearing on RENAULT MEGANE I Cabriolet (EA0/1_) 2.0 16V IDE 1999 by yourself
    Remove the wheel.
  5. Step 6
    How to remove RENAULT MEGANE 2.0 2000 Wheel Bearing - online easy-to-follow instructions
    Clean the brake drum. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Wheel Bearing on RENAULT MEGANE I Cabriolet (EA0/1_) 2001: download PDF manuals and video instructions
    Remove the hub bearing protection cap. Use a hammer. Use a crowbar.
    Replacement: wheel bearing – RENAULT MEGANE I Cabriolet (EA0/1_). AUTODOC recommends:
    Some cars are not equipped with wheel hub caps.
  7. Step 8
    How hard is it to do yourself: Wheel Bearing replacement on Renault Megane 1 Convertible 2.0 i (EA0G) 2002 - download illustrated guide
    Clean the wheel hub fastener. Use WD-40 spray.
  8. Step 9
    Need to know how to renew Wheel Bearing on RENAULT MEGANE 2003? This free workshop manual will help you to do it yourself
    Unscrew the wheel hub axle nut. Use a drive socket #30. Use a tap wrench.
  9. Step 10
    Changing of Wheel Bearing on Renault Megane 1 Convertible 1996 won't be an issue if you follow this illustrated step-by-step guide
    Remove the brake drum.
    Replacement: wheel bearing – RENAULT MEGANE I Cabriolet (EA0/1_). AUTODOC experts recommend:
    Examine the brake drum. Replace it if necessary.
  10. Step 11
    RENAULT MEGANE 1.6 e Wheel Bearing replacement: online guides and video tutorials
    Remove the wheel hub bearing retaining ring. Use circlip pliers.
  11. Step 12
    Replacing Wheel Bearing on Renault Megane 1 Convertible 1998 1.6 16V (EA04, EA0B, EA11, EA1J) by yourself
    Press out the wheel hub bearing. Use a bush and bearing driver set.
  12. Step 13
    MEGANE I Cabriolet (EA0/1_) 2.0 1999 Wheel Bearing DIY replacement workshop manual
    Clean the hub bearing mounting seat. Use WD-40 spray.
  13. Step 14
    How to change Wheel Bearing on RENAULT MEGANE I Cabriolet (EA0/1_) 2000 - tips and tricks
    Press a new bearing into the wheel hub. Use a bush and bearing driver set.
    AUTODOC recommends:
    Replacement: wheel bearing – RENAULT MEGANE I Cabriolet (EA0/1_). Do not use excessive force during installation. This may damage the part.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the RENAULT Megane I Convertible (EA) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY RENAULT MEGANE I Cabriolet (EA0/1_) Wheel Bearing replacement - online guide
Tips & tricks for your RENAULT MEGANE I Cabriolet (EA0/1_)
View more
  • How to change Wheel bearings on RENAULT MEGANE I Cabriolet (EA0/1_) 1.4 16V - replacement tricks
    What to do if your car’s bonnet won’t open | AUTODOC tips
  • Changing Hub bearing Renault Megane 1 Convertible 1.6 16V (EA04, EA0B, EA11, EA1J) - Replacement Tips
    How to restore a steering wheel | AUTODOC tips
  • Maintenance Hacks - RENAULT MEGANE I Cabriolet (EA0/1_) 1.6 e Wheel bearing kit replacement guide
    Top Automatic Transmission Blunders You Must Dodge | AUTODOC Insights
  • Replace Wheel hub bearing on Renault Megane 1 Convertible - free video tips
    Top 5 mistakes when replacing spark plugs | AUTODOC tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
RENAULT MEGANE I Cabriolet (EA0/1_) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME