When to replace the Poly V-Belt on your PEUGEOT PARTNER
Recommended replacement interval for the part category Serpentine belt : 6 year / 125000 km
Important!
This replacement procedure can be used for:
PEUGEOT PARTNER Tepee 1.6 VTi, PEUGEOT PARTNER Tepee 1.6 VTi View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for PARTNER Tepee and other PEUGEOT models
How to change Serpentine belt on Peugeot Partner Tepee 1.6 HDi 16V – step-by-step instructions for straightforward car repair Serpentine belt
How to change V-Ribbed Belt Set on Peugeot Partner Tepee 1.6 HDi 16V – step-by-step instructions for straightforward car repair V-Ribbed Belt Set
How to change Water Pump + V-Ribbed Belt Kit on Peugeot Partner Tepee 1.6 HDi 16V – step-by-step instructions for straightforward car repair Water Pump + V-Ribbed Belt Kit
Tools
Replacement: serpentine belt – PEUGEOT PARTNER Tepee. Tools you need:
Combination spanner #30
Fender cover
AUTODOC recommends:
  • Please note: all work on the car – PEUGEOT PARTNER Tepee – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Poly V-Belt on Peugeot Partner Tepee 2008 - free PDF and video manuals
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #30.
  2. Step 4
    How to replace PEUGEOT PARTNER Tepee 1.6 HDi 16V 2009 Poly V-Belt - step-by-step manuals and video guides
    Remove the V-ribbed belt.
    Replacement: serpentine belt – PEUGEOT PARTNER Tepee. Tip from AUTODOC:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
  3. Step 5
    Return the tensioner pulley to its initial position.
    Step 6
    Peugeot Partner Tepee 1.6 HDi 90 2010 Poly V-Belt replacement: free workshop manuals
    Install the V-ribbed belt.
    AUTODOC recommends:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  4. Step 7
    Changing Poly V-Belt on PEUGEOT PARTNER Tepee 1.6 BlueHDi 100 2011 by yourself
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #30.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
PEUGEOT PARTNER Tepee Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY PEUGEOT PARTNER Tepee Poly V-Belt replacement - online guide
Tips & tricks for your PEUGEOT PARTNER Tepee
View more
  • How to change Alternator belt on PEUGEOT PARTNER Tepee 1.6 HDi - replacement tricks
    What causes engine misfire? | AUTODOC
  • Changing Auxiliary belt Peugeot Partner Tepee 1.6 HDi 16V - Replacement Tips
    DIY starter repair | AUTODOC tips
  • Maintenance Hacks - PEUGEOT PARTNER Tepee 1.6 HDi 90 Poly V-belt replacement guide
    How to Make a DIY Foam Sprayer | AUTODOC tips
  • Replace Drive belt on Peugeot Partner Tepee - free video tips
    How to find and change a fuse | AUTODOC