
Disclaimer
How to change serpentine belt on NISSAN JUKE (F15) – replacement guide
downloads:
51
Views:
1457

Recommended replacement interval for the part category Serpentine belt : 4 year / 80000 km
Important!
This replacement procedure can be used for:
NISSAN JUKE (F15) 1.6 DIG-T NISMO, NISSAN JUKE (F15) 1.5 dCi, NISSAN JUKE (F15) 1.6 DIG-T, NISSAN JUKE (F15) 1.6 DIG-T 4x4 … View more
The steps may slightly vary depending on the car design.
NISSAN JUKE (F15) 1.6 DIG-T NISMO, NISSAN JUKE (F15) 1.5 dCi, NISSAN JUKE (F15) 1.6 DIG-T, NISSAN JUKE (F15) 1.6 DIG-T 4x4 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for JUKE (F15) and other NISSAN models
Serpentine belt
Alternative products

Torque wrench
Combination spanner #10
Combination spanner #16
Drive socket # 13
Wheel impact socket #17
Ratchet wrench
Clip removal tool
Fender cover
Wheel chock
Replacement: serpentine belt – NISSAN JUKE (F15). AUTODOC recommends:
- All work should be done with the engine stopped.
Replacement: serpentine belt – NISSAN JUKE (F15). Use the following procedure:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Secure the wheels with chocks.
- Step 4Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 5Raise the front of the car and secure on supports.Step 6Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. NISSAN JUKE (F15)
- Step 7Remove the wheel.
- Step 8Remove the wheel arch cover. Use a clip removal tool.
- Step 9Unscrew the fuel filter bracket fixing bolts. Use a drive socket #13. Use a ratchet wrench.
- Step 10Remove the fuel filter fastening bracket.
- Step 11Unscrew the fuel filter bracket fixing bolts. Use a combination spanner #10.
- Step 12Remove the fuel filter fastening bracket.
- Step 13Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
- Step 14Remove the V-ribbed belt.
- Step 15Return the tensioner pulley to its initial position.Replacement: serpentine belt – NISSAN JUKE (F15). Tip:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.Step 16Install the V-ribbed belt.AUTODOC recommends:Make sure that the V-ribbed belt fits all pulleys snugly.
- Step 17Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
- Step 18Place the V-ribbed belt on the tensioner pulley.
- Step 19Return the tensioner pulley to its initial position.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the NISSAN Juke (F15) model
Popular maintenance tutorials for Nissan Juke f15
Complete guides for changing the Alternator belt on different NISSAN JUKE models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your NISSAN JUKE (F15)
View more
- How to easily repair a punctured tyre | AUTODOC tips
- Why Is the Windscreen Washer Not Spraying? Solution
- #DIY Guide: How to Fix a Cracked Windscreen Without a Garage Visit
- Save Money on Fuel with These Easy Tips | AUTODOC
Most commonly replaced car parts on NISSAN JUKE
Time to replace parts? Get even better deals in our Shop app.

SCAN ME