Important!
This replacement procedure can be used for:
PEUGEOT 308 I Hatchback (4A_, 4C_) 1.6, PEUGEOT 308 I Hatchback (4A_, 4C_) 1.6 16V, PEUGEOT 308 I Hatchback (4A_, 4C_) 1.6 16V, PEUGEOT 308 I Hatchback (4A_, 4C_) 1.6 HDi, PEUGEOT 308 I Hatchback (4A_, 4C_) 1.6 HDi, PEUGEOT 308 I Hatchback (4A_, 4C_) 1.6 16V, PEUGEOT 308 I Hatchback (4A_, 4C_) 1.6 16V, PEUGEOT 308 I Hatchback (4A_, 4C_) 1.4 16V View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Engine Mount for 308 I Hatchback (4A_, 4C_) and other PEUGEOT models
Tools
Replacement: engine mounts – PEUGEOT 308 (4A_, 4C_). Tools you might need:
Wire brush
WD-40 spray
Sealant
Copper grease
Torque wrench
Drive socket # E14
Torx bit T50
Ratchet wrench
Clip removal tool
Jack
Fender cover
Wheel chock
Replacement: engine mounts – PEUGEOT 308 (4A_, 4C_). AUTODOC experts recommend:
  • All work should be done with the engine stopped.
Replacement: engine mounts – PEUGEOT 308 (4A_, 4C_). Recommended sequence of steps:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Engine Mount on Peugeot 308 Mk1 2007 - free PDF and video manuals
    Release the coolant reservoir retainers. Use a clip removal tool.
  2. Step 4
    How to replace PEUGEOT 308 I Hatchback (4A_, 4C_) 1.6 HDi 2008 Engine Mount - step-by-step manuals and video guides
    Remove the coolant reservoir cap.
  3. Step 5
    Peugeot 308 Mk1 1.6 16V 2009 Engine Mount replacement: free workshop manuals
    Remove the engine cover.
    AUTODOC recommends:
    Replacement: engine mounts – PEUGEOT 308 (4A_, 4C_). Do not use excessive force when removing the part as this may damage it.
  4. Step 6
    Changing Engine Mount on PEUGEOT 308 I Hatchback (4A_, 4C_) 1.4 16V 2010 by yourself
    Support the engine in the oil pan area. Use a jack.
  5. Step 7
    How to remove PEUGEOT 308 1.6 HDi 2011 Engine Mount - online easy-to-follow instructions
    Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 8
    How to replace Engine Mount on PEUGEOT 308 I Hatchback (4A_, 4C_) 2012: download PDF manuals and video instructions
    Unscrew the fasteners that connect the engine mount to the car body. Use a drive socket #E14. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Engine Mount replacement on Peugeot 308 Mk1 2.0 HDi 2013 - download illustrated guide
    Unscrew the engine mount fasteners. Use Torx T50. Use a ratchet wrench.
  8. Step 10
    Need to know how to renew Engine Mount on PEUGEOT 308 2014? This free workshop manual will help you to do it yourself
    Remove the engine mount.
    Replacement: engine mounts – PEUGEOT 308 (4A_, 4C_). AUTODOC recommends:
    Carefully check the other engine mounts and replace them if necessary.
  9. Step 11
    Changing of Engine Mount on Peugeot 308 Mk1 2015 won't be an issue if you follow this illustrated step-by-step guide
    Remove the fastening bolts.
  10. Step 12
    PEUGEOT 308 1.6 HDi Engine Mount replacement: online guides and video tutorials
    Clean the mounting seat of the engine mount. Use a wire brush. Use WD-40 spray.
  11. Step 13
    Replacing Engine Mount on Peugeot 308 Mk1 2007 1.6 HDi by yourself
    Treat the engine mount fasteners. Use a sealant.
  12. Step 14
    308 I Hatchback (4A_, 4C_) 1.6 HDi 2008 Engine Mount DIY replacement workshop manual
    Install the engine mount to its mounting seat.
  13. Step 15
    How to change Engine Mount on PEUGEOT 308 I Hatchback (4A_, 4C_) 2009 - tips and tricks
    Install the fastening bolts.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT 308 I Hatchback (4A, 4C) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
PEUGEOT 308 I Hatchback (4A_, 4C_) Engine Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY PEUGEOT 308 I Hatchback (4A_, 4C_) Engine Mount replacement - online guide
Tips & tricks for your PEUGEOT 308 I Hatchback (4A_, 4C_)
View more
  • How to change Engine mounts on PEUGEOT 308 I Hatchback (4A_, 4C_) 2.0 HDi - replacement tricks
    How to paint a brake caliper | AUTODOC tips
  • Changing Engine mounting Peugeot 308 Mk1 1.6 HDi - Replacement Tips
    5 car tips for a winter's day | AUTODOC tips
  • Maintenance Hacks - PEUGEOT 308 I Hatchback (4A_, 4C_) 1.6 16V Motor mounts replacement guide
    Top 6 products for enhancing your car | AUTODOC tips
  • Replace Motor mount on Peugeot 308 Mk1 - free video tips
    DIY brake caliper restoration | AUTODOC tips